quadient iX-5 Series Ouick Installation Manual

iX-5 Series
iX-5 Series
Quick Installation Guide
Quick Installation Guide
ink cartridge
Mailing System Components :
An online interactive installation guide is available at :
Mailing System Components :
feeding table
feeding table
and moistener
and moistener
back of mailing system base
An online interactive installation guide is available at :
he mailing system base (a)
(h) and ink cartridge (i) bays.
.quadient.us/ix5_install
back of mailing system base
eding Attach shelf
base (a). Then attach weighing platform (d).
Unpack all components from the box, remove packaging and any
transit tape.
LAN cable
(i) into the ink bay with the 'TOP' sticker facing upwards.
Unpack all components from the box, remove packaging and any
i) towards the back of the mailing system base until you
Next
transit tape.
over.
Mem
weighing platform (WP)
to Open the meter cover. Place the meter
securely into position. Close the meter cover.
(j) to the top of the mailing system
power cable
A C E G I K
B D F H J
weighing platform
(WP)
(h)
weighing platform (WP)
Insert the WP connector
base (a). Then connect the LAN cable
of the mailing system.
meter
Headset alignment
Select letter with arrows
and press «OK»
shelf
kb.quadient.us/ix5_install
LAN cable
mailing system
base
into the meter bay and slide in until it fits
(e) into the port on the rear of the mailing s
ink cartridge
Amount
Postage Available
$ 100.00
Enter amount:
$ 10
mailing system
power cable
base
catch tray
kb.
Insert the in
Push the ink
hear a 'click
weighing platform
(WP)
(f) and power cable (g) to eac
Lift the co
reveal the
shelf
Mem