Related Manuals for HOOKE ROAD BXG.9019
Summary of Contents for HOOKE ROAD BXG.9019
- Page 1 BXG.9019 Fender Flares (1) Contents: Part Name Size(mm) Part Name Size(mm) Fender Flares I×28 Flat Washer M6*12*1 H×14 Button Head Socket Cap Bolts Screws M6*25 J×14 Nylon Insert Lock Nut...
-
Page 2: Tools Required
(2) Tools required: a. Adjustable Curved Jaw Locking Pliers; b. Drive Socket Ratchet Wrench; c. 5mm Hex Bit Socket; d. The Jack; e. 10mm Wrench; (3) Installation time: About 2 hours, 1-2 persons needed. Installation time is different according to your mechanical skill level. - Page 3 Step 2: Remove the original fender flares. Step3: Use a drill to clean and enlarge the original car hole.
- Page 4 Step4: Install the new fender flares into your car.
- Page 5 Step 5: Tighten all of the bolts. Step 6: Install the original car tires.
- Page 6 Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! Attention: 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
Need help?
Do you have a question about the BXG.9019 and is the answer not in the manual?
Questions and answers