Related Manuals for HOOKE ROAD BXG.9802-S
Summary of Contents for HOOKE ROAD BXG.9802-S
- Page 1 BXG.9802-S Side Steps (1) Contents: Part Name Size(mm) Picture Hex Bolts M8*25 Split Lock Washer Flat Washer M8*20*2...
- Page 2 About 40 minutes, 1-2 people may be needed. Installation time may differ according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the electronic version (BXG.9802-S), please scan the QR code.
- Page 3 (4) Installation instruction: Passenger Side Installation Step 1: Remove the factory side steps. And distinguish the side steps. (According to the mounting brackets, the front bracket has two mounting holes). Step 2: Preparing to install our side steps. Make sure that mounting locations are correct.
- Page 4 Step 3: Lift up the side step, align it with the holes, use M8*25 hex bolts to secure the side step to the vehicle. Tighten up all of bolts. Step 4: Repeat the same procedure on the other side.
- Page 5 Step 5: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product! Attention 1.The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
Need help?
Do you have a question about the BXG.9802-S and is the answer not in the manual?
Questions and answers