Advertisement
Quick Links
TYGER RIDER
BEFORE INSTALLATION
READ INSTRUCTIONS CAREFULLY BEFORE STARTING
INSTALLATION. REMOVE CONTENTS FROM BOX AND
VERIFY ALL PARTS ARE PRESENT. FAILURE TO IDENTI-
FY DAMAGE BEFORE INSTALLATION COULD LEAD TO A
REJECTION OF ANY CLAIM. IF MISSING PARTS OR ANY
DAMAGE FOUND, PLEASE TAKE A PICTURE FOR THE
CLAIM PURPOSE. TO FILE YOUR CLAIM, PLEASE VISIT:
WWW.TYGERAUTO.COM/CONTACT
Driver/Left Tyger Rider
x1
Passenger/Right Tyger Rider
x1
Driver/Left Front Mounting Bracket
x1
Passenger/Right Front Mounting Bracket
x1
Driver/Left Center Mounting Bracket
x1
Passenger/Right Center Mounting Bracket
x1
Driver/Left Rear Mounting Bracket
x1
Passenger/Right Rear Mounting Bracket
x1
Driver/Left Front Support Bracket
x1
Passenger/Right Front Support Bracket
x1
Driver/Left Center Support Bracket
x1
Passenger/Right Center Support Bracket
x1
®
®
Parts List
Customer Support: www.tygerauto.com/contact
TORQUE VALUES
Fastener Size
Class 8.8 Torque (ft-lbs)
6mm
8mm
15-16
10mm
31-32
12mm
54-55
14mm
87-88
Driver/Left Rear Support Bracket
x1
Passenger/Right Rear Support Bracket
x1
10-1.5mm x 30mm Hex Bolts
x6
10mm x 24mm OD x 2.2mm Flat Washers
x12
10mm Nylon Lock Nuts
x6
8-1.25mm x 35mm Hex Bolts
x6
8-1.25mm x 25mm Combo Bolts
x12
8mm Lock Washers
x6
8mm x 28mm OD x 3mm Flat Washers
x6
6-1.0mm x 25mm Hex Bolts
x12
6mm x 22mm OD x 2mm Flat Washers
x24
6mm Nylon Lock Nuts
x12
1/5
TG-SS2J35198
Class 10.9 Torque (ft-lbs)
6-7
22-23
44-45
78-79
125-126
6-7
V211118
Advertisement
Related Manuals for Tyger RIDER TG-SS2J35198
Summary of Contents for Tyger RIDER TG-SS2J35198
- Page 1 54-55 78-79 WWW.TYGERAUTO.COM/CONTACT 14mm 87-88 125-126 Parts List Driver/Left Tyger Rider Driver/Left Rear Support Bracket Passenger/Right Tyger Rider Passenger/Right Rear Support Bracket Driver/Left Front Mounting Bracket 10-1.5mm x 30mm Hex Bolts Passenger/Right Front Mounting Bracket 10mm x 24mm OD x 2.2mm Flat Washers...
- Page 2 STEP 3 STEP 1 REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE Select the Driver/Left Front Mounting Bracket (Fig 3). PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE IMPORTANT: Use the illustration above and (Fig 3) to properly STARTING INSTALLATION. SIDE STEPS OR RUNNING BOARDS identify the Mounting Bracket.
- Page 3 (1) 10mm Hex Bolt (2) 10mm Flat Washers (1) 10mm Nylon Lock Nut (Fig 5) Driver/Left side Front Mounting Bracket attached (Fig 7) Attach Support Bracket to the rear face of the mounting bracket STEP 4 Select the Driver/Left Front Support Bracket. IMPORTANT: Use the illustration above to help identify the correct Support Bracket.
- Page 4 (Fig 9) Driver/Left side 2nd mounting location (Fig 12) Driver/Left Center Mounting Bracket and Support Bracket attached to 2nd location STEP 6 Move to the last mounting location on the rocker panel and locate the threaded insert and pair of holes in the pinch weld (Fig 13). Repeat STEPS 3 &...
- Page 5 STEP 7 Select the Driver/Left Sidebar. Use the illustration above to select the correct Sidebar. Carefully position the Sidebar onto the (3) Mounting Brackets. Front IMPORTANT: DO NOT slide, (front to back or rotate), the Sidebar on the Brackets or damage to the finish on the Sidebar may result.
Need help?
Do you have a question about the RIDER TG-SS2J35198 and is the answer not in the manual?
Questions and answers