Advanced > Filters > Mac Filters - D-Link DVG-1402S User Manual

Protocol
IP Address
Subnet Mask
Start Port/End Port
All computers are
uniquely identified by their
MAC (Media Access
Control) address. The
following window will allow
users to deny computers
access to the Internet or
only allow certain
computers access to the
Internet, based on their
MAC address. To access
this screen, click the
Advanced tab along the
top of the configuration
window, then the Filters
tab to the left hand side
and finally click the
corresponding radio
button for MAC Filters.
Index
MAC Address
State
The protocol associated with this IP filter. The user may choose
between TCP, UDP or Both.
An IP address or range of IP addresses that will be denied
access to the Internet.
The subnet mask that corresponds to the IP address above.
A port or range of ports that will be denied access to the
Internet. If no port is entered, all ports in this IP range will be
denied access to the Internet.
Advanced > Filters > MAC Filters
A number used to identify this MAC address filter setting.
Enter the MAC address to be filtered.
This field allows you to enable or disable this MAC address
filter setting.
38