Related Manuals for Jet JT1-1372
Summarization of Contents
Warranty and Service Information
Warranty Period
Specifies the duration of the limited warranty for JET products and accessories.
Warranty Coverage Scope
Defines that the warranty applies exclusively to the initial purchaser of the product.
Covered Defects and Materials
Details defects in workmanship and materials, excluding misuse, accidents, and normal wear.
Warranty Limitations and Exclusions
Outlines restrictions on implied warranties and exclusions for consequential damages.
Product Warranty Period Chart
Lists different product categories and their respective warranty durations.
Setup and Assembly
Shipping Contents
Lists all components included in the sander's shipping package.
Cabinet Assembly
Step-by-step guide for assembling the main cabinet structure of the sander.
Table and Motor Unit Installation
Instructions for mounting the table and motor assembly onto the sander's cabinet base.
Cabinet Door Installation
Procedure for attaching the sander's cabinet door using hinge mechanisms.
Platen Vertical Positioning
Guidance on how to adjust the sanding platen to its vertical orientation.
Table to Belt Gap Adjustment
Procedure for setting the correct clearance between the work table and the sanding belt.
Sanding Belt Installation
Steps for properly fitting and tensioning the sanding belt onto the machine.
Extension Table Setup
Instructions for attaching and using the extension table for contour sanding.
Electrical Connections (Initial)
Electrical Grounding Instructions
Details the importance and procedure for properly grounding the sander for safety.
115V Operation Setup
Guidance for connecting the sander to a 115V power supply and outlet.
230V Operation Setup
Instructions for rewiring and connecting the sander for 230V power.
Extension Cord Usage Guidelines
Recommendations for selecting and using appropriate extension cords with the sander.
Adjustments
Platen Angle and Table Adjustment
Procedures for adjusting the sanding platen angle and work table position.
Sanding Belt Replacement
Step-by-step instructions for removing and installing a new sanding belt.
Belt Tracking Fine Adjustment
Detailed steps for fine-tuning the sanding belt's tracking for optimal alignment.
Motor Mount Coarse Tracking Adjustment
Procedure for coarse adjustment of belt tracking via the motor mount.
Work Table Height Adjustment
Instructions on how to raise or lower the work table to the desired level.
End Guard Operation
Information on manipulating the end guard for different sanding operations.
Extension Table Functionality
Details on the extension table's purpose and adjustment for contour sanding.
Operation
Horizontal Sanding Operation
Steps and considerations for performing sanding in a horizontal orientation.
Vertical Sanding Operation
Instructions and tips for performing sanding in a vertical orientation.
Contour Sanding Operation
Guidance on performing contour sanding using the extension table.
Maintenance
Machine Lubrication Guide
Recommendations for lubricating moving parts and bearings for optimal machine performance.
Replacement Parts
Cabinet Assembly Exploded View
Detailed exploded diagram of the sander's cabinet assembly with part references.
Main Machine Assembly Exploded View
Exploded view illustrating the sander's main mechanical and electrical components.
Table Assembly Exploded View
Diagram showing the exploded view of the sander's table assembly and its parts.
Oscillating Edge Sander Parts List
Comprehensive list of replacement parts with index numbers, part numbers, and descriptions.
Electrical Connections Diagrams
115V Electrical Connection Diagram
Wiring diagram for connecting the sander to a 115V power source.
230V Electrical Connection Diagram
Wiring diagram for connecting the sander to a 230V power source.
Need help?
Do you have a question about the JT1-1372 and is the answer not in the manual?
Questions and answers