Adobe FRAMEMAKER 7 Manual page 197

ADOBE FRAMEMAKER 7.0 217
Classroom in a Book
7 Make sure the Custom option is still set to 144 dpi and click Set.
You could change the properties of the anchored frame as you did in the previous section.
This time, though, you'll use a shortcut that places the anchored frame into the paragraph
and resizes the anchored frame so the graphic just fits inside it. (This is called
shrinkwrapping.)
8 Make sure the anchored frame is still selected, press Esc m p (the Esc key followed by
the letters m and p in sequence). The graphic now appears with the correct spacing above
and below.
Anchoring graphics in the column
Next you'll position a graphic at the bottom of the column. It's a wide graphic, so it will
span both columns.
1 Go to page 4.
2 Click at the end of the heading Elsewhere Along Alii Drive.
This graphic will appear at the bottom of the column, so you won't need a separate
paragraph for it.
3 Choose File > Import > File.
4 Select the Sunset.tif file in the Art folder (within the Lesson09 folder).