Adobe FRAMEMAKER 7 Manual page 12

14 LESSON 1
Working with FrameMaker 7.0 Documents
To properly set up for Part One, the first 13 lessons of this book, please be sure you are in
standard FrameMaker 7.0 by doing the following:
1 From the main menu choose File > Preferences > General (Windows and Mac OS) or
File > Preferences (UNIX). The Preferences dialog box appears.
Note: If the last entry already reads FrameMaker or you can tell from the configuration of the
main menu title bar that you are already in standard mode, skip steps 2–5; you are properly
set up for Part One, the first 13 lessons.
2 In the Product Interface area at the bottom of the dialog box, select FrameMaker.
3 Click Set. The application will tell you to Quit and then to Restart the program.
4 Quit FrameMaker. Choose File > Quit.
5 Restart the FrameMaker 7.0 application. After it opens, you will note from the main
menu that you are operating in the standard mode.
Exploring the document window
Before you begin work on a document of your own, you'll take a quick look at the
FrameMaker 7.0 document window, which appears when you create or open a document.
Opening a document
First, you'll open a sample document.
1 Do one of the following: