Straddling table cells
The contents of the first body cell (5 x 5 in.) are intended to apply to all the rows, not just the
first one. To make this clear, you'll make the first cell in the column straddle all the others.
1 Drag from the cell with the text 5 x 5 in. down to the last empty cell in the column.
results. If the image resolution is too high for an output
device, it will take a long time to image; if the image res-
olution is too low, the quality of the output will be poor.
Image
Resolution
Publication
Size
(ppi)
5 x 5 in.
Newspaper
160
Magazine
266
Art book
350
2 Choose Table > Straddle. The cell now spans all the body cells in the column.
results. If the image resolution is too high for an output
device, it will take a long time to image; if the image res-
olution is too low, the quality of the output will be poor.
Image
Resolution
Publication
Size
(ppi)
Newspaper
160
5 x 5 in.
Magazine
266
Art book
350
3 Click anywhere on the page to deselect the cells.
Reusing a table format
Now that you've set up the table format, you can reuse it whenever you need to.
1 Go to the last page of the document.
2 Click at the end of the text or right click to access the context menu and choose Table >
Insert Table.
3 Select StandardTable in the Table Format scroll list and click Insert. The table that
appears uses the format you created in this lesson. Because the straddle cell you created is
not part of the format, it does not appear in the table.
4 If you want, experiment by adding information to the table.
Line Screen
(lpi)
80
133
175
Line Screen
(lpi)
80
133
175
ADOBE FRAMEMAKER 7.0
179
Classroom in a Book
Need help?
Do you have a question about the FRAMEMAKER 7 and is the answer not in the manual?
Questions and answers