Adobe AUDITION 3 User Manual page 98

vertical line; a completely out-of-phase stereo waveform appears as a diagonal line descending from left to right; a
typical stereo waveform appears as many wavy lines descending from right to left; and a stereo waveform with wide
separation appears as many wavy lines extending in all directions.
•
Rotates the Left/Right display to the left by 45˚. The horizontal ruler (x-axis) plots the side channel
Mid/Side
([right - left]/2) while the vertical ruler (y-axis) plots the mid channel ([right + left]/2).
•
Displays amplitude rather than phase, redrawing the waveform on an axis that rotates in the phase graph.
Spin
•
Histogram (Log Zoom)
•
Similar to Histogram (Log Zoom), but displays the entire range. This option is useful for
Histogram (Log Full)
viewing pure mono at the edges of the graph.
•
Similar to Histogram (Log Zoom), but displays the graph on a linear (rather than logarithmic)
Histogram (Linear)
scale. You may notice larger jumps and variations when using this option because of the linear scale. Click Normalize
to constrain the display to the full screen.
•
Displays the phase of individual frequencies. Higher frequencies appear toward the outer edge of the
Phase Wheel
graph.
Defines the number of samples displayed concurrently. Higher sample sizes give you more accurate results,
Samples
but they require much more processing power to be effective. Choose the sample size that best suits your system.
Additional display options for Histogram modes
•
Displays blue and red tracer lines that help you see in- and out-of-phase audio, respectively.
Show Tracers
•
Displays a ball that shows the overall stereo and phase location of audio. The ball turns red for
Show Ball
out-of-phase audio, green for in-phase audio, and yellow for borderline audio.
•
Modulate By Amplitude
the phase graphic shrinks for quiet audio and gets larger for loud audio.
•
Displays the Mono, Left, Right, and Inverse axis labels.
Show Labels
•
Displays a yellow line that slowly contracts from the highest recent peak.
Show Peaks
•
Displays a purple line that slowly expands from the lowest recent valley.
Show Valleys
•
Static Peaks and Valleys
Additional display option for Spin mode
rotation.
Analyze frequency range
In Edit View, you can use the Frequency Analysis panel to identify problematic frequency bands, which you can then
correct with a filter effect. In this panel, the horizontal axis represents frequency (measured in Hz), while the vertical
axis represents amplitude (measured in decibels).
To save or print a Frequency Analysis graph, press Alt+PrtScn, and then paste into an image-editing application.
Displays the default circular histogram.
Right-click the graph and select from the following options:
Changes the size of the phase graphic relative to amplitude. When this option is selected,
Displays the absolute peak and valley since the start of audio playback.
Right-click the graph and select Edit Spin Rate to change the speed of
ADOBE AUDITION 3.0 93
User Guide