Multitrack Effects - Adobe AUDITION 3 User Manual

produces a chorus effect, lower the Overlapping percentage. Doing so, however, can produce a choppy sound. Simply
adjust Overlapping to strike a balance between choppiness and chorusing. Overlapping can be as high as 400%, but
you should use this value only for very high speed increases (200% or more).
•
Choose Appropriate Defaults
good for preserving pitch or tempo.

Multitrack effects

Envelope Follower effect (Multitrack View only)
The Multitrack > Envelope Follower effect varies the output level of one waveform based on the input level of
another. The amplitude map, or envelope, of one waveform (the analysis wave) is applied to the material of a second
waveform (the process wave), resulting in the second waveform taking on the amplitude characteristics of the first.
This effect lets you, for example, have a bass guitar line that sounds only when a drum is hit. In this example, the
drum waveform is the Analysis wave, and the bass guitar waveform is the Process wave.
In addition to applying an amplitude envelope to a waveform, you can alter the dynamic properties of the resulting
signal with a variety of settings to otherwise expand, gate, compress, or limit it.
See also
"Select ranges in Multitrack View" on page 181
"About process effects" on page 104
"Control effects settings with graphs" on page 104
"Use effect presets" on page 104
Apply the Envelope Follower effect
In separate tracks, position two audio clips so that the sections you want to process together overlap.
1
2 Select the Hybrid tool
In the Main panel, select the range you want to process.
3
4 Ctrl-click both audio clips.
Note: If you select a range by dragging across a clip, that clip is selected by default; if you Ctrl-click the clip, you will
deselect it.
Choose Effects > Envelope Follower, and set the desired options.
5
Envelope Follower options
Specifies which waveform to use as the analysis wave. In other words, it provides the amplitude
Analysis Wave
envelope. You can choose any waveform in the session window.
Specifies which waveform to apply the analysis waveform to. You can choose any waveform in the
Process Wave
session window.
Specifies which track to output the resulting waveform to. The default setting is the next available track.
Output To
Applies good default values for Splicing Frequency and Overlapping. This option is
or the Time Selection tool .
ADOBE AUDITION 3.0 174
User Guide