Adobe AUDITION 3 User Manual page 209

A
Two clip envelopes
A. Volume envelope B. Pan envelope
See also
"Edit automation envelopes" on page 207
"About spline curves for graphs" on page 105
Show or hide clip envelopes
❖
From the View menu, choose either of the following:
• Show Clip Volume Envelopes
• Show Clip Pan Envelopes
Use spline curves for clip envelopes
❖
Right-click the clip containing the envelope, and choose Clip Envelopes > [envelope type] > Use Splines.
Rescale a clip volume envelope
If an envelope is too high or low, preventing you from raising or lowering edit points, you can rescale it.
Right-click the clip containing the envelope, and choose Clip Envelopes > Rescale Clip Volume Envelopes.
1
2 Enter the number of decibels by which you want to raise or lower the envelope. Possible values range from –40 to
40. Negative values raise envelopes and lower clip volume by an equal amount; positive values do the opposite.
You can also rescale all volume envelopes in a session. (See "Mixing properties for sessions" on page 210.)
Automating track settings
With track envelopes, you can change volume, pan, and effect settings over time. Adobe Audition displays track
envelopes in automation lanes below each track. Each automated parameter has its own automation lane and
envelope, which you edit just like clip envelopes.
A
Automating track settings in the Main panel
A. Automation lane B. Envelope for parameter
B
B
ADOBE AUDITION 3.0 204
User Guide