Adobe AUDITION 3 User Manual page 242

A
D
E
Preview controls in the Surround Encoder
A. Transport controls B. Time indicator C. Output meters D. Preview device E. Preview volume F. Preview device change button G. Master
Level
Places the cursor at the start of the track.
Go To Beginning
Plays the selected track from the cursor location to the end of the track, regardless of the current zoom
Play Track
level.
Plays the complete surround mix from the cursor location to the end of the session, regardless of the current
Play All
zoom level.
Located next to the Play All button, this indicator shows the time at the current cursor location.
Time indicator
Controls preview volume without affecting the amplitude of exported files. (Use the Master Level
Preview Volume
slider to control exported amplitude.)
Output meters (L, R, C, LFE, Ls, Rs)
click Play Track, the meters display the output of only the selected track. If you click Play All, the meters display the
output of the complete 5.1 mix, reflecting levels for exported files.
Sets the overall amplitude for exported files. Use this slider with the output meters to maximize overall
Master Level
amplitude and ensure that no channels are clipping.
Displays the currently selected device to which Adobe Audition routes the six-channel,
Preview Device, Format
surround output.
See also
"Set the preview device for surround mixes" on page 237
Set the preview device for surround mixes
To accurately preview 5.1 surround mixes, you need a DirectSound or ASIO sound card with at least six outputs. If
you use a DirectSound card, you need a special interleaved driver.
In the Surround Encoder, the Preview Device, Format box shows the current output driver and bit depth for
surround mixes. You can change these settings in the Audio Hardware Setup dialog box.
Click the Audio Hardware Setup button
1
In the Surround Encoder tab, select an audio driver for the sound card you want to use, and then map each 5.1
2
channel to a sound card output. For more information, see "Set audio inputs and outputs" on page 31.
Note: Unlike ASIO sound cards, DirectSound cards that support 5.1 playback require a specific configuration of speakers,
so you can't map channels to different outputs. However, some DirectSound cards provide different drivers for stereo and
5.1 output; in this case, select the 5.1 driver. (Cards like the Creative Labs Audigy, which uses one driver for both stereo
and surround, will automatically route a 5.1 mix to the correct outputs.)
B C
F G
This set of six meters displays the amplitude of each surround channel. If you
to the right of the Preview Device, Format box.
ADOBE AUDITION 3.0 237
User Guide