Visually Fading And Changing Amplitude - Adobe AUDITION 3 User Manual

You can create fantastic combo effects by selecting part of a wave and using the Mix Paste command with Modulate
selected. The selection is modulated with the audio signal on the clipboard.
Applies a fade to the beginning and end of the pasted audio. Enter a value to specify how many milli-
Crossfade
seconds of the audio are faded.
Use this option for smoother transitions to and from pasted audio.
From Clipboard [number]
From Windows Clipboard
audio data, this option is disabled.
Pastes audio data from a file. Click Select File to browse for the file.
From File
Pastes audio data the specified number of times. If the audio is longer than the current selection, the
Loop Paste
current selection is automatically lengthened accordingly.
Delete or trim audio data
Adobe Audition provides two methods for deleting audio: The Delete Selection command lets you remove a range
from a waveform, whereas the Trim command lets you remove unwanted audio from both sides of the selected audio.
Note: Deleted data doesn't go to the clipboard and can be retrieved only by choosing Edit > Undo or File > Revert To
Saved, but only if you haven't saved the file since deleting the data.
❖
Do one of the following:
• To delete audio data, select the audio data you want to delete. Then choose Edit > Delete Selection.
• To trim audio data, select the audio data you want to keep. Then choose Edit > Trim.

Visually fading and changing amplitude

About on-clip fade and gain controls
Though various effects can change amplitude or produce fades, on-clip fade and gain controls make the task quick
and intuitive. As you drag these controls in the Main panel, a visual preview helps you precisely adjust audio.
Pastes audio data from the active internal clipboard.
Pastes audio data from the Windows clipboard. If the Windows clipboard contains no
ADOBE AUDITION 3.0 78
User Guide