Adobe ACROBAT 3D Manual page 680

Setting PostScript options
Use the PostScript Options panel of the Advanced Print Setup dialog box to set options for
a particular PostScript printer, such as how to handle nonresident printer fonts and how to
download Asian fonts. In addition, if an Adobe PDF file contains device-dependent
settings, such as halftones and transfer functions, these settings can be sent in the
PostScript output to override the default settings in the printer. To use these options, you
must be connected to a PostScript printer, or have a PostScript printer driver installed with
a PPD file selected.
To set PostScript options:
1. Select the PostScript Options panel on the left side of the Advanced Print Setup dialog
box.
2. For Font And Resource Policy, specify how fonts and resources are downloaded.
3. For Print Method, choose the PostScript level of the output device.
4. Select other options in the PostScript panel as desired. For more information, see the
option descriptions at the bottom of the panel. If you don't have access to Asian fonts used
in a PDF document, you can download them using this panel. (See
language-specific fonts.)
About downloading