Adobe ACROBAT 3D Manual page 394

Editing, moving, and redefining tags
You can edit the tag's title, change the tag's location, or change the tag type for an
element. All page content must be tagged, marked as an artifact, or removed from the
logical structure tree. (See
Logical structure tree in the Tags tab A. Figure tag B. Image content C. Paragraph tag
To edit a tag title:
1. In the Tags tab, expand the section of the logical structure that you want to edit.
2. To edit the title, do one of the following:
Double-click the tag type, insert the pointer after the tag (in angle brackets), type a title,
and then click anywhere to exit edit mode.
Select the tag, choose Properties from the Options menu, enter text in the Title box, and
click Close.
Your title appears after the tag type, which appears in angle brackets.
To move a tag:
1. In the Tags tab, expand the Tags root to view all tags.
2. Select the Tag icon
3. Do one of the following:
Drag the tag up or down to the location you want. As you drag, a line appears at viable
locations.
Choose Cut from the Options menu; select the tag that appears above the location where
you want the tag; and from the Options menu, choose Paste to move the tag to the same
level as the selected tag, or choose Paste Child to move the tag within the selected tag.
(See Tags tab
To change the element type:
1. In the Tags tab, expand the section of the logical structure that you want to change.
2. Select an element.
3. Choose Properties from the Options menu.
4. Choose a new element type from the Type pop-up menu, and then click Close.
Related Subtopics:
Tags tab options
Adding supplementary information to tags
Tagging Comments
Correcting tables and table elements
Tags tab
of the element you want to move.
options.)
options.)