Adobe ACROBAT 3D Manual page 520

Reorganizing the commands in a batch sequence
You can alter batch sequences, whether they are batch sequences you created yourself or
predefined. You can add, rearrange, and delete commands in the batch sequence
definitions to suit your work requirements.
To change the commands in a batch sequence:
1. Choose Advanced > Batch Processing.
2. In the Batch Sequences dialog box, select the batch sequence you want to change, and
then click Edit Sequence.
3. In the Batch Edit Sequence dialog box, click Select Commands.
4. To change the sequence of commands, do any of the following, and then click OK:
To add a command to the sequence, select it in the list on the left and click Add to move it
to the list on the right.
To delete a command from the sequence, select it on the right and click Remove.
To change the order in which the commands are applied, select a command, and click
Move Up or Move Down.
Note: You can also edit the options for individual commands in the batch sequence or add
interactive pauses at strategic points in the batch processing. (See
command and Making batch sequences interactive.)
Editing the options in a