Adobe ACROBAT 3D Manual page 563

Displaying cross sections
Displaying a cross section of a 3D model is like cutting it in half and looking inside. Use
the Cross Section Controls dialog box to adjust the alignment, offset, and tilt of the cutting
plane.
Before and after cross section
To apply a cross section:
1. Click the Toggle Cross Section icon
section.
2. To change cross section properties, choose Cross Section Properties from the Cross
Section pop-up menu on the 3D toolbar. (See
3. (Optional) Click Save Section View to create a view that you can return to later.
Related Subtopics:
Cross section settings
on the 3D toolbar to turn on or off the cross
Cross section settings.)