The notebook does not react
Cause
The notebook is in Standby or
Suspend mode.
The application programme has
caused the malfunction
The battery is dead.
The mouse does not work
Cause
The touchpad has been deactivated..
Touchpad driver is not installed
properly
Mouse driver is not loaded
Mouse is not connected
A26391-K276-Z226-1-7619, edition 2
Troubleshooting
►
Disable Standby mode (press a key) or Suspend
mode (switch notebook on).
►
Close the application programme or restart the
notebook (by switching it off and back on again or
performing a warm boot).
►
Charge the battery.
or
►
Install a charged battery.
or
►
Connect the notebook via its mains adapter to the
mains outlet.
Troubleshooting
►
Activate the touchpad by pressing the Fn + F4
key combination.
►
Uninstall the touchpad driver.
►
Install the actual driver from the "Drivers & Utilities"
CD.
►
Check whether the correct mouse driver is properly
installed and is present before the application
programme is started.
Detailed information can be found in the User guides for
the mouse or application programme.
►
Check whether the mouse cable is correctly
connected to the notebook.
►
If you use an adapter or extension lead with the
mouse cable, check the connections.
►
Switch the notebook on.
Troubleshooting and tips
109