Installing A Module; Optical Drive - Fujitsu FPCM11641 - INTEL CORE 2 DUO PROCESSOR P8600 CENTRINO Operating Manual

Using your notebook

Installing a module

► Place the module into the module bay so that the contacts enter first.
► Push the module into the module bay until you feel it locking into place.

Optical drive

You can replace your optical drive with another drive, a battery or a Weight Saver (see "Modules").
Please observe the safety information in the "Important notes" chapter.
!
You should not move the device as long as the CD/DVD in the optical drive is being
accessed (e.g. do not carry the unit around configured as a Tablet PC). You should only
use the CD/DVD drive in a horizontal or vertical orientation.
Do not hold the notebook directly by the drive module bay while the CD/DVD in the optical
drive is being accessed.
You may use both 8-cm and 12-cm CDs/DVDs in the combo drive.
When using CDs/DVDs of poor quality vibrations and reading errors may occur.
54 A26391-K276-Z226-1-7619, edition 2