Using your notebook
Modules
The design of your notebook enables the flexible use of notebook batteries and drives. The following
modules can be operated in the module bay of your notebook:
●
Second battery
●
Drive: hard disk: second
●
Super multi drive
●
Weight Saver
Only use modules designed for your notebook.
!
Do not use force when installing or removing the module.
Make sure that no foreign objects enter the module bay.
You can replace modules during operation. This means you do not need to switch off the
i
notebook.
To replace a module, simply click on the corresponding icon in the task bar and then on
Exit or Select – Exit.
Then you can simply remove the module.
If the module is locked, this can be unlocked via the Control Panel.
52
A26391-K276-Z226-1-7619, edition 2