The Notebook Does Not Start After Switching It On; The Notebook Stops Working; The Printer Does Not Print - Fujitsu LIFEBOOK E548 Operating Manual

The notebook does not start after switching it on

Notebook
Cause
The battery is not installed correctly.
The battery is dead.
The AC adapter is not connected properly.

The notebook stops working

Notebook Ending
Cause
The notebook is in energy saving mode.
An application program has caused the
malfunction.
The battery is dead.

The printer does not print

Printer doesnotprint
Cause
The printer is not switched on.
The printer is not connected correctly.
The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.
Fujitsu
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
Troubleshooting
► End energy saving mode.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
Troubleshooting
► Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).
► Check that the data cable connecting
the notebook to the printer is properly
connected.
► Check whether the correct printer driver is
loaded (refer to the printer documentation).
Troubleshooting and tips
77