The Cursor Does Not Correctly Follow The Stylus Movements; Stylus Input Not Working; The Notebook Does Not Start After Switching It On; The Notebook Stops Working - Fujitsu Lifebook U939X Operating Manual

The cursor does not correctly follow the
stylus movements
Cause
Stylus incorrectly calibrated.

Stylus input not working

Cause
The stylus is in power saving mode.
The stylus battery is completely discharged.

The notebook does not start after switching it on

Notebook
Cause
The battery is dead.
The AC adapter is not connected properly.

The notebook stops working

Ending Notebook
Cause
The notebook is in energy saving mode.
An application program has caused the
malfunction.
The battery is dead.
Fujitsu
Troubleshooting
► Calibrate the stylus as shown under
Hardware and Sound / Tablet PC Settings
in the Control Panel, see
stylus", Page 37
Page 37.
Troubleshooting
► Press gently on the tip of the stylus to
reactivate the stylus.
► Carefully insert the stylus in its slot on the
notebook to charge the stylus battery.
Troubleshooting
► Connect the notebook to the power supply
via the AC adapter and charge the battery.
► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
Troubleshooting
► End energy saving mode.
► Close the application program or restart
the notebook (by restarting the operating
system or switching the device off and back
on again).
► Connect the notebook to the power supply
via the AC adapter and charge the battery.
Troubleshooting and tips
"Adjusting the
and "Calibrating the stylus",
83