The Cursor Does Not Correctly Follow The Stylus Movements; Stylus Input Not Working; The Notebook Does Not Start After Switching It On - Fujitsu LIFEBOOK T937 Operating Manual

Troubleshooting and tips
The cursor does not correctly follow the
stylus movements
Cause
Stylus incorrectly calibrated.

Stylus input not working

Cause
Incorrect driver installed.

The notebook does not start after switching it on

Notebook
Cause
The battery is not installed correctly.
The battery is dead.
The AC adapter is not connected properly.
82
Troubleshooting
► Calibrate the stylus as shown under
Hardware and Sound / Tablet PC Settings
in the Control Panel, see
stylus", Page 34
Page 34.
Troubleshooting
► If your device is one which can only be
operated using the stylus, install the driver
for the standard model.
or
► If your device is one which can be
operated using the stylus and by finger,
install the driver for the "Dual Digitizer"
model.
Troubleshooting
► Check whether the battery is installed
correctly in its compartment.
► Switch the notebook on.
► Charge the battery.
or
► Insert a charged battery.
or
► Connect the AC adapter to the notebook.
► Check whether the AC adapter is properly
connected to the notebook.
► Switch the notebook on.
"Adjusting the
and "Calibrating the stylus",
Fujitsu