Memory Cards; Inserting A Memory Card; Removing A Memory Card; Data Transfer - Fujitsu FPCM11641 - INTEL CORE 2 DUO PROCESSOR P8600 CENTRINO Operating Manual

Memory cards

The slot is suitable for memory cards of the type "Secure Digital I/O", "Memory Stick" and "Memory
Stick PRO".

Inserting a memory card

► Gently push the memory card into the slot until it clicks into place.

Removing a memory card

► Press on the edge of the memory card so that the memory card jumps out of the slot slightly.
► Pull the memory card out of the slot.

Data transfer

UMTS and SIM card (optional)

Depending on the particular equipment of your notebook, it may be equipped with a UMTS
i
module which you can use with the aid of a SIM card.
The UMTS module can be switched on and off using the switch for the wireless
components – see " Wireless LAN/Bluetooth/UMTS radio components (optional)". You can
also use the UMTS Watcher software to define profiles and switch individual wireless
components on or off.
If UMTS reception is not sufficient when using the device as a Tablet PC you can use it is
as a notebook instead – see "Select display orientation (portrait or landscape orientation)".
!
Follow the instructions supplied by the provider of the SIM card.
Inserting the SIM card
► Switch your notebook off.
► Close the LCD screen.
► Unplug the mains plug of the mains adapter from the mains socket.
► Disconnect all cables connected to the notebook.
► Open the protective rubber cover over the SIM card slot.
Do not pull on the SIM card lock! The lock could otherwise break off. Always slide the lock
!
in the direction of the arrow as shown.
A26391-K276-Z226-1-7619, edition 2
Using your notebook
59