Brief Overview Of Security Functions - Fujitsu FPCM11641 - INTEL CORE 2 DUO PROCESSOR P8600 CENTRINO Operating Manual

Brief overview of security functions

You will find comprehensive information on the security configuration of your device
i
in the "Professional Notebook" manual on the "Drivers & Utilities" CD/DVD
or on the Internet under "http://ts.fujitsu.com/support/".
Security functions
Kensington Lock
Fingerprint sensor (device
dependent)
BIOS password protection
Boot from Removable Media
Owner Information
System Lock
SmartCard reader (device
dependent)
Trusted Platform Module
(device dependent)
A26391-K276-Z226-1-7619, edition 2
Type of protection
Mechanical
Biometric
Password protection for BIOS
Setup, operating system and
hard disk with supervisor and
user password. The passwords
consist of a maximum of eight
alphanumeric characters.
Prevent unauthorised boot of an
operating system from external
media (e.g. USB stick, USB-
CD-ROM drive, etc).
Overlay information from
Service desk or owner during
the boot process
The BIOS and the system can
only be started with SmartCard
and PIN.
PIN and SmartCard protection
for operating system
Identification and authentication
of the notebook
Security functions
Preparation
Fit and lock Kensington
MicroSaver (accessory).
Install the supplied fingerprint
software.
Specify at least one Supervisor
password in the BIOS Setup and
activate the password
protection for the operating
system and hard disk as
required.
In BIOS Setup, in the menu
Security the option Boot from
Removable Media is processed.
In BIOS Setup, in the menu
Security, the option Owner
Information is processed.
Initialise the SmartCard in the
BIOS.
Install software e.g. SmartCase
Logon+ (accessory). Specify a
password when the SmartCase
Logon+ software is used.
In BIOS Setup a
supervisor password is
configured
and the TPM (Security Chip) is
switched on.
69