Smartcard User Groups - Fujitsu FPCM11641 - INTEL CORE 2 DUO PROCESSOR P8600 CENTRINO Operating Manual

SmartCard user groups

With SystemLock , user groups can be created. This makes it possible to use a SmartCard to start
several systems. A user group consists of at least two systems. Each user that is allowed to start the
systems is provided with a SmartCard. With this SmartCard the user can select a system to start.
Basic information on setting up user groups
During installation of SystemLock the first device in the user group is set up as "Single PC". The
Admin SmartCard generated during this process is used for the user group generation. During
installation, SystemLock sets up each further device as "Group PC". The existing Admin SmartCard
is plugged in, the information is read in and the device is added to the user group. The Admin
SmartCard decides which user group the device belongs to.
If you use CardOS SmartCards, then SystemLock can be administrated with the Windows Program
"SystemLock Admin". With "SystemLock Admin" you can conveniently manage SystemLock at the
operating system level, construct SystemLock organisational units and groups, create SmartCards
for the organisational units or groups, issue access rights at different levels for user cards, as well as
remotely recreate access rights. The PIN or PUK of your SmartCard or the SmartCards of other
users can be changed by you, and you can also reactivate blocked cards.
For a detailed description, see the "SystemLock Admin" help manual.
Select System -
mode: F3
PC 2
A26391-K276-Z226-1-7619, edition 2
PC 1
3
Admin Card
PC1
Select Sy stem -
mode: F1
1
Smart Card
PC 1
2
Admin Card
PC 1
3
PC3
Admin Card
PC1
Security functions
Se lect System -
mode: F3
3
PC 4
Admin Card
PC1
79