Verifying Installation On The Management Module; Upgrading Browsers And Jre; Hp Insight Remote Support Software - HP 4400 Software Manual

10. Press the reset button (2,
address.
Upon reset, the WOCP login window opens. Continue with
management module" (page

Verifying installation on the management module

To verify that the management module software was upgraded successfully:
1. On the WOCP login window, log in as an HP EVA administrator (user name admin and the
password).
NOTE:
The WOCP GUI appears.
2. Click View detailed system information and verify the operation state, XCS version, and
management module software version.
To verify that HP P6000 Command View was upgraded successfully:
1. Open a browser and navigate to HP P6000 Command View:
https://array IP address:2372
2. Log in using the same user name and password that you use for the WOCP login.
3. Verify that the correct time is set:
a. On the Initialized Storage System Properties window, select System Options.
b. Select Set time options.
c. Verify that the time displayed in the Current system time box is correct. If it is incorrect,
enter the correct time and save your changes.

Upgrading browsers and JRE

Estimated time to complete: 10–20 minutes
When to perform: Anytime before the upgrade
Ensure that you are using a supported browser and JRE. HP P6000 Command View may not work
correctly with an unsupported browser.
The JRE is not used by HP P6000 Command View, but is required for HP P6000 Replication
Solutions Manager, WEBES, and SAN Visibility. See
Manager (optional)" (page 36)
For information on supported browsers, see Table 5.0, Browser support, in the HP P6000 Enterprise
Virtual Array Compatibility Reference. See
this document.
NOTE: If you need to update the browser on remote computers, do so after you have upgraded
HP P6000 Command View.

HP Insight Remote Support software

HP strongly recommends that you install HP Insight Remote Support software to complete the
installation or upgrade of your product and to enable enhanced delivery of your HP Warranty,
HP Care Pack Service or HP contractual support agreement. HP Insight Remote Support supplements
your monitoring, 24x7 to ensure maximum system availability by providing intelligent event
diagnosis, and automatic, secure submission of hardware event notifications to HP, which will
initiate a fast and accurate resolution, based on your product's service level. Notifications may be
Figure 8 (page
35).
If set before the upgrade, the password is maintained during the upgrade process.
for more information.
34)) on the management module to activate the IP
"Verifying installation on the
"Upgrading HP P6000 Replication Solutions
"Reference documentation" (page 6) for the link to
Upgrading browsers and JRE 35