HP 2000sa Deployment Manual page 61

configuring the BladeSystem enclosure, the Insight Display verifies that there are no
installation or configuration errors.
g. Complete the Onboard Administrator First Time Setup Wizard. (See the HP BladeSystem
Onboard Administrator user guide.)
h. Record additional important system information about each device in the BladeSystem
c-Class enclosure in the spaces provided in
"Server and P700m controller worksheet" (page
(page 68). To obtain system information, open Onboard Administrator and view
information for each device in the BladeSystem enclosure.
5. Upgrade firmware on the BladeSystem enclosure, P700m Controllers, and 3Gb SAS BL
Switches to the latest, compatible versions.
a. For each BladeSystem device, determine the currently-installed firmware version and
record it in the provided spaces in
information is displayed in Onboard Administrator, in the Rack Firmware page.
b. For each BladeSystem device, determine if there is a newer version of firmware available.
Firmware for all BladeSystem enclosure components can be obtained from the HP
BladeSystem Firmware Maintenance page:
nl
http://h18004.www1.hp.com/products/blades/components/c-class.html. Select the
Compatibility tab and use the provided table to view version information and download
firmware.
c. As needed, upgrade firmware on the devices using the individual SmartComponent
firmware package or in conjunction with the HP Smart Update Firmware DVD ISO.
For more information on firmware updating methods, see
BladeSystem components and devices" (page
6. For each server that will boot locally (not use the storage enclosure as a boot device), install
the operating system. If not included in your solution, proceed to the next step.
If the storage enclosure will be used as the boot device, the operating system must not be
installed at this time.
For detailed information, see the HP ProLiant Server Blade User Guide.
7. Install the MDS600 storage enclosures. If not included in your solution, proceed to the next
step.
For detailed instructions on installing MDS600 storage enclosures, see "Setup" in the HP
StorageWorks 600 Modular Disk System User Guide.
a. Before installing each MDS600 storage enclosure, record important device information
in "MDS600 storage enclosure worksheet" (page
b. Determine the currently-installed firmware version and record it in the provided spaces
in "Device worksheets" (page
In the Systems and Devices navigation tree, select the SAS BL Switch, and then click More
Information. Scroll through the display to see the firmware (and more) information about
each device attached to each switch port.
c. Determine if there is a newer version of firmware available. Firmware for the MDS600
can be obtained from the HP Support Downloads website
downloads. Be sure to download and use the .fuf file download; do not download the
SmartComponent .scexe file, because it is not supported in this solution environment.)
d. Rack the MDS600 storage enclosure.
e. Insert drives in the MDS600 storage enclosure drawers. Be sure that either a blank module
or a drive is installed in each drive bay, to ensure proper airflow and cooling.
f. Connect SAS cables from the MDS600 I/O modules to the switch.
Be sure to follow provided guidelines of a fault-tolerant cabling configuration to utilize
the high-availability features.
"Solution summary worksheet" (page 66)
67), and
"Device worksheets" (page
74).
69).
65). Firmware version information is displayed in the VSM.
"SAS BL Switch worksheet"
65). Firmware version
"Updating firmware on
(http://www.hp.com/support/
Installation steps 61