Msa70 Drive Enclosure Port Information - HP 2000sa Deployment Manual
Hp direct-connect external sas storage for hp bladesystem solutions deployment guide
Hide thumbs
Also See for 2000sa:
- User manual (76 pages) ,
- Quickspecs (21 pages) ,
- Installation instructions (2 pages)
Table of Contents
Advertisement
MSA70 drive enclosure port information
MSA2000 drive enclosures are supported for use in MSA2000sa G2 environments.
As shown in the following illustration:
SAS In port: one, on the left-side of the I/O module. Use this SAS expansion port to connect
to an MSA2000sa G2 controller enclosure or to an MSA2000 or MSA70 drive enclosure
that is between this drive enclosure and the controller enclosure.
SAS Out port: one, on the right-side of the I/O module. Use this SAS expansion port to connect
(cascade) an additional MSA2000 or MSA70 drive enclosure.
NOTE:
Mini-SAS to SAS cables are required when connecting MSA2000 drive enclosures. For
more information about purchasing these cables, see the MSA2000sa G2 QuickSpecs or HP
StorageWorks 2000sa G2 Modular Smart Array supported cable configurations.
88
Device SAS port information
Advertisement
Table of Contents
Troubleshooting
