Installation Steps - HP 2000sa Deployment Manual

7 Installation steps

This section provides an overview of the steps required to install a BladeSystem enclosure with
external SAS storage; details are not included in the scope of this document. For details, see the
setup and installation instructions provided with each device. User documents for devices in this
solution are available on the HP Manuals website
the device websites:
BladeSystem Technical Resources website:
(under the Installing tab)
MDS600 website:
MSA2000sa G2 website:
Manuals)
MSA2000sa website:
Tape Storage & Media website:
Tape Autoloaders)
NOTE:
While installing this solution, record device and system information in
(page 65). This information is used in later installation or configuration steps, and will be
helpful for troubleshooting and support purposes.
In this installation overview, the use of MSA2000sa refers to both the first-generation
MSA2000sa and the second-generation MSA2000sa G2. Installation tasks for the MSA2000sa
and MSA2000sa G2 are identical.
58

Installation steps

http://www.hp.com/go/mds600
http://www.hp.com/go/msa2000sa
http://www.hp.com/go/msa
http://www.hp.com/go/tape
http://www.hp.com/support/manuals
http://www.hp.com/go/bladesystem/documentation
(under HP Support & Drivers > Manuals)
(under HP Support & Drivers >
(under Retired products)
(under Business Class Libraries or
and on
"Device worksheets"