Laser Safety Warning; Certification And Classification Information; Laser Product Label - HP 2000fc User Manual

Laser Safety Warning

Warning –
Do not try to open the laser device enclosure. There are no user-serviceable
■
components inside.
Do not operate controls, make adjustments, or perform procedures to the laser
■
device other than those specified herein.
Allow only HP authorized service technicians to repair the laser device.
■

Certification and Classification Information

This product contains a laser internal to the fiber optic (FO) transceiver for
connection to the Fibre Channel communications port.
In the USA, the FO transceiver is certified as a Class 1 laser product conforming to
the requirements contained in the Department of Health and Human Services
(DHHS) regulation 21 CFR, Subchapter J. A label on the plastic FO transceiver
housing indicates the certification.
Outside the USA, the FO transceiver is certified as a Class 1 laser product
conforming to the requirements contained in IEC 825-1:1993 and EN 60825-1:1994,
including Amendment 11:1996 and Amendment 2:2001.

Laser Product Label

The optional label in Figure 4-1 or equivalent may be located on the surface of the
HP supplied laser device.
Figure 4-1 Class 1 Laser Product Label
66 HP StorageWorks 2012fc Modular Smart Array user guide • March 2008
To reduce the risk of exposure to hazardous radiation:
This optional label indicates that the product is classified as a
CLASS 1 LASER PRODUCT. This label may appear on the laser
device installed in your product.