Configuring Your Web Browser For Smu - HP 2000fc User Manual

9. In the host computer's command window, type the following command to verify
Ethernet connectivity, first for controller A and then for controller B:
ping IP-address
If you cannot your access your system for at least three minutes after changing
the IP address, your network might require you to restart the management
controller using the serial CLI. When you restart a management controller,
communication with it is temporarily lost until it successfully restarts.
Type the following command to restart the management controller on both
controllers:
restart mc both

Configuring Your Web Browser for SMU

Before using SMU to perform remaining steps, ensure that your web browser is
properly configured according to the following guidelines:
Use one of the following browsers:
■
■
■
Because SMU uses popup windows to indicate the progress of user-requested
■
tasks, disable any browser features or tools that block popup windows.
For optimal performance, set your browser to use stored (cached) web pages.
■
Note –
your browser.
To optimize display, use a color monitor and set its color quality to the highest
■
setting.
For Internet Explorer, to ensure you can navigate beyond SMU login page, set
■
the local-intranet security option to medium or medium-low.
Microsoft Internet Explorer 5.5 or later
Mozilla Firefox 1.0.7 or later
Changing your browser cache setting might affect other sites you visit with
Chapter 4 Configuring a System for the First Time 53