I/O Card Installation; Compatible I/O Cards - Yamaha DME64N - Pro Audio Owner's Manual

I/O Card Installation

7.
Launch the DME Designer application, create configuration and transfer.
DME Designer setup, operation, and data transfer instructions can be found in the DME Designer Manual.
This completes preparation of the DME64N/24N system.
I/O Card Installation
The DME64N has four I/O card slots, and the DME24N has one I/O card slot. The number of audio input channels
available on the DME64N/24N can be increased by plugging the appropriate mini-YGDAI I/O card(s) into the available card
slot(s).

Compatible I/O Cards

As of April, 2007, Yamaha mini-YGDAI cards that can be used with the DME64N/24N are as follows:
Card Name
MY8-AT
MY8-TD
MY8-AE
MY4-AD
MY8-AD
MY4-DA
MY8-AD24
MY8-AD96
MY8-DA96
MY8-ADDA96
MY8-AE96S
MY8-AE96
MY8-AEB
MY16-AT
MY16-AE
MY16-TD
MY16-C
MY16-CII
The input/output numbers above apply to 44.1/48kHz operation.
(*)
In order to use three or four MY16-C cards, firmware V1.10 or later will be required.
If the serial number written on the upper surface of your DME64N is shown below, a hardware upgrade is needed.
KK, KL, KM, KN, KO, KP, KX, KY are the third and fourth digits of the serial number.
A fee is charged for the hardware upgrade.
For details, contact Yamaha customer support using the contact information located at the end of the "DME64N/24N Owner's
Manual."
For the latest information on what cards can be used with the DME64N/24N, visit the Yamaha Pro Audio
website at: http://www.yamahaproaudio.com/
20
DME64N/DME24N Owner's Manual
Function Input
ADAT 8
TDIF-1 8
AES/EBU 8
ANALOG IN 4
ANALOG IN 8
ANALOG OUT –
ANALOG IN 8
ANALOG IN 8
ANALOG OUT –
ANALOG IN/OUT 8
AES/EBU 8
AES/EBU 8
AES/EBU 8
ADAT 16
AES/EBU 16
TDIF-1 16
CobraNet 16
CobraNet 16
No. of Available Cards
Output
DME64N DME24N
8 4
8 4
8 4
– 4
– 4
4 4
– 4
– 4
8 4
8 4
8 4
8 4
8 4
16 4
16 4
16 4
16 4(*)
16 4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1