MACROMEDIA DREAMWEAVER MX 2004-USING DREAMWEAVER Use Manual page 51

Navigating the Property inspector
You can use the keyboard to navigate the Property inspector and make changes to your document.
Note: Tabbing and the use of arrow keys are supported for Windows only.
To navigate the Property inspector:
Press Control+F3 to display the Property inspector, if it is not visible.
1
Press Control+Alt+Tab until you shift focus to the Property inspector.
2
Press the Tab key to move through the Property inspector options.
3
Use the arrow keys as appropriate to move through option choices, and press Enter (Windows)
4
or Return (Macintosh) to make a selection.
Press Control+Tab (Windows) or Option+Tab (Macintosh) to open and close the expanded
5
section of the Property inspector, as necessary, or, with focus on the expander arrow at the
bottom right, press the Spacebar.
Related topics
•
"Navigating panels" on page 50
•
"Navigating frames" on page 52
•
"Navigating tables" on page 52
Navigating dialog boxes
You can use the keyboard to navigate dialog boxes.
Note: Tabbing and the use of arrow keys are supported for Windows only.
To navigate a dialog box:
Press the Tab key to move through the options in a dialog box.
1
Use the arrow keys to move through choices for an option.
2
For example, if an option has a pop-up menu, move focus to that option, and then use the
down arrow to move through the choices.
If the dialog box has a Category list, press Control+Tab (Windows) or Option+Tab
3
(Macintosh) to shift focus to the category list, and then use the arrow keys to move up or down
the list.
Press Control+Tab (Windows) or Option+Tab (Macintosh) again to shift to the options for
4
a category.
Press Enter (Windows) or Return (Macintosh) to exit the dialog box.
5
Related topics
•
"Navigating panels" on page 50
•
"Navigating the Property inspector" on page 51
•
"Navigating tables" on page 52
Using Dreamweaver accessibility features 51