MACROMEDIA DREAMWEAVER MX 2004-USING DREAMWEAVER Use Manual page 250

Adding, deleting, and changing the order of a repeating region entry
Use repeating region controls to add, delete, or change the order of entries in template-based
documents. When you add a repeating region entry, a copy of the entire repeating region is
added. To update the content in the repeating regions, the original template must include an
editable region in the repeating region.
To add, delete, or change the order of a repeating region:
Place the insertion point in the repeating region to select it.
1
Do one of the following:
2
Click the Plus (+) button to add a repeating region entry below the currently selected entry.
Click the Minus (–) button to delete the selected repeating region entry.
Click the Down Arrow button to move the selected entry down one position.
Click the Up Arrow button to move the selected entry up one position.
Note: Alternatively, you can select Modify > Template, then select one of the repeating entry
options near the bottom of the context menu. You can use this menu to insert a new repeating
entry or move the selected entry's position.
To cut, copy, and delete entries:
Place the insertion point in the repeating region to select it.
1
Do one of the following:
2
To cut a repeating entry, select Edit > Repeating Entries > Cut Repeating Entries.
To copy a repeating entry, select Edit > Repeating Entries > Copy Repeating Entries.
To remove a repeating entry, select Edit > Repeating Entries > Delete Repeating Entries.
To paste a repeating entry, select Edit > Paste.
Note: Pasting inserts a new entry; it does not replace an existing entry.
Related topics
•
"Creating repeating regions" on page 234
250 Chapter 11: Managing Templates