MACROMEDIA DREAMWEAVER MX 2004-USING DREAMWEAVER Use Manual page 162

To show or hide the tracing image:
•
Select View > Tracing Image > Show.
The tracing image is visible only in Dreamweaver. It is never visible when you view the page in a
browser. When the tracing image is visible, the page's real background image and color are not
visible in the Document window; however, the background image and color will be visible when
the page is viewed in a browser.
To change the position of a tracing image:
Select View > Tracing Image > Adjust Position.
1
Do one of the following:
2
To precisely specify the position of the tracing image, enter coordinate values in the X and
Y text boxes.
To move the image one pixel at a time, use the arrow keys.
To move the image 5 pixels at a time, press Shift and an arrow key.
To reset the position of the tracing image:
•
Select View > Tracing Image > Reset Position.
The tracing image returns to the upper left corner of the document window (0,0).
To align the tracing image to a selected element:
Select an element in the Document window.
1
Select View > Tracing Image > Align with Selection.
2
The upper left corner of the tracing image is aligned with the upper left corner of the
selected element.
162 Chapter 7: Laying Out Pages with CSS