MACROMEDIA DREAMWEAVER MX 2004-USING DREAMWEAVER Use Manual page 205

If the Frame Tag Accessibility Attributes dialog box appears, complete the dialog box for each
3
frame, then click OK.
For more information, click the Help button in the dialog box.
Note: If you click Cancel, the frameset appears in the document, but Dreamweaver does not
associate accessibility tags or attributes with it.
To edit frame tag accessibility attributes, see
attributes" on page
To create a new empty predefined frameset:
Select File > New.
1
In the New Document dialog box, select the Framesets category.
2
Select a frameset from the Framesets list.
3
Click Create.
4
The frameset appears in your document and the Frame Tag Accessibility Attributes dialog box
appears, if you have activated the dialog box in Preferences (see
accessible page design" on page
If the Frame Tag Accessibility Attributes dialog box appears, complete the dialog box for each
5
frame, then click OK.
For more information, click the Help button in the dialog box.
Note: If you press Cancel, the frameset appears in the document, but Dreamweaver does not
associate accessibility tags or attributes with it.
To edit frame tag accessibility attributes, see
attributes" on page
Designing a frameset
You can design your own frameset in Dreamweaver by adding "splitters" to the window. If you
prefer to use a predefined frameset, see
Tip: Before creating a frameset or working with frames, make the frame borders visible in the
Document window's Design view by selecting View >Visual Aids > Frame Borders.
To create a frameset:
•
Select Modify > Frameset, then select a splitting item (such as Split Frame Left or Split Frame
Right) from the submenu.
Dreamweaver splits the window into frames. If you had an existing document open, it appears
in one of the frames.
210.
53).
210.
"Using a predefined frameset" on page
"Viewing and setting frame properties and
"Optimizing the workspace for
"Viewing and setting frame properties and
Creating frames and framesets
204.
205