MACROMEDIA DREAMWEAVER MX 2004-USING DREAMWEAVER Use Manual page 177

To add multiple rows or columns:
Click in a cell.
1
Select Modify > Table > Insert Rows or Columns.
2
The Insert Rows or Columns dialog box appears.
Select Rows or Columns, then complete the dialog box.
3
For more information, click the Help button in the dialog box.
Click OK.
4
The rows or columns appear in the table.
To delete a row or column, do one of the following:
•
Click in a cell within the row or column you want to delete, then select Modify > Table >
Delete Row or Modify > Table > Delete Column.
•
Select a complete row or column (see
Edit > Clear or press the Delete key.
The entire row or column disappears from the table.
To add or delete rows or columns using the Property inspector:
Select the table (see
1
In the Property inspector (Windows > Properties), do one of the following:
2
Increase or decrease the Rows value to add or delete rows.
Dreamweaver adds and removes rows at the bottom of the table.
Increase or decrease the Cols value to add or delete columns.
Dreamweaver adds and removes columns at the right side of the table.
Note: Dreamweaver does not warn you if you are deleting rows and columns that contain data.
Related topics
•
"Inserting a repeating table" on page 236
•
"Displaying multiple recordset results" on page 566
"Selecting rows or columns" on page
"Selecting a table" on page 168).
Adding and removing rows and columns
168), then select
177