MACROMEDIA CONTRIBUTE 3 - USING AND ADMINISTERING CONTRIBUTE Use Manual page 67

Navigate to the file you want to convert to a Flash document, and then click Open.
3.
The FlashPaper Options dialog box appears.
Select the options you want to apply to the document you are inserting.
4.
For information about options in the dialog box, click the Help button.
Click OK.
5.
Contribute converts the document to a Flash document (SWF file) and inserts it into your
draft.
Tip: Select Edit > Undo FlashPaper if you want to remove the Flash document (SWF file) you just
inserted.
To create and insert a Flash document by dragging:
In the draft, place the insertion point where you want the Flash document to appear.
1.
Tip: Reduce the size of the Contribute window so that you can also see the application that
contains the file you plan to drag.
Drag the document that you want to convert to the insertion point.
2.
If the Insert Microsoft Office Document dialog box appears, select Insert the document with
3.
FlashPaper, set options as necessary, and then click OK.
Contribute converts the document to a Flash document (SWF file) and inserts it into your
draft.
Tip: Select Edit > Undo FlashPaper if you want to remove the Flash document you just inserted.
To delete a Flash document from a draft:
In the draft, click the Flash document (SWF file) to select it.
1.
Press Delete.
2.
Related topics
•
"About converting documents with FlashPaper" on page 57
•
"Creating a Flash document in another application" on page 69
Converting documents with FlashPaper 67