Table of Contents
Advertisement
CAV6.6 Controller-Rear Panel
10
SPEAKER OUTPUTS - Connect 8 Ohm speakers for each zone by using detachable
color-coded modular snap connectors
11
AUDIO/VIDEO INPUTS - Six sets of Audio/Video Line Level input connections for
CAV6.6 source components
12
ACC IR OUTPUT - ACC IR Output jack will pass all IR signals from all keypads
13
PAGE LINE LEVEL AUDIO GAIN CONTROL - Adjusts the Line Level Audio Page Input
14
PAGE A/V INPUTS - RCA jacks allow for one Audio/Video Page Input. Signal sensing
is used on Page Audio In to initiate a page
15
PAGE 12VDC TRIGGER OUT - Page Trigger Out supplies 12VDC whenever 12VDC is
applied to the Page 12VDC Trigger In
16
PAGE 12VDC TRIGGER IN - Applying 12VDC to the Page 12VDC Trigger In jack will
activate Audio/Video Page for assigned CAV6.6 Zones and initiate a page (overrides
signal sense)
17
HOME THEATER 12VDC TRIGGER IN - 12VDC input jack notifies the CAV6.6 that
additional A/V components are active, e.g., home theater equipment
18
12VDC TRIGGER OUT - 12VDC 50ma Trigger Out turns on when any zone is on
19
A-BUS READY SUB-ZONES - A-BUS Amplified Control Modules and Hubs can be added
for additional sub-zones of audio (Zones 1 to 4 only)
20
R-NET LINK IN AND LINK OUT - Links multiple CAV6.6's, also links future Russound
components that are R-NET compatible
21
RS-232 INTERFACE - The RS-232 Interface on the rear and on the front, allows the
zones to be controlled by PC or other devices that have an RS-232 Interface. The
RS-232 Interface also allows for software updates and programming
INSTALLER
COMPONENT GUIDE
21
Advertisement
Table of Contents
