Russound CAV66 1 Instruction Manual
  1. Manuals
  2. Brands
  3. Russound Manuals
  4. Amplifier
  5. CAV66 1
  6. Instruction manual

Russound CAV66 1 Instruction Manual

6-zone, 6-source audio/video controller amplifier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CAV6.6-S2 System
6-Zone, 6-Source
Audio/Video Controller Amplifier
INSTRUCTION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAV66 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Russound CAV66 1

Summary of Contents for Russound CAV66 1

  • Page 1 CAV6.6-S2 System 6-Zone, 6-Source Audio/Video Controller Amplifier INSTRUCTION MANUAL...

  • Page 2: Important Safeguards

    It is not necessary to make any other D.The appliance does not appear to operate normally; or changes. If you have any questions please call Russound Inc. at 1-800-638-8055 or 603-659-5170 E. The appliance has been dropped or the enclosure is damaged.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS USER SECTION Product Introduction..............................6 Component Guide CAV6.6 Controller..............................7-8 UNO-S2 Keypad ..............................9 UNO-S1 Keypad ..............................10 SRC2 Remote Control............................11 Operation CAV6.6 Controller ..............................12 UNO-S2 Keypad Button Functions..........................13 UNO-S2 User Menu - Setting Preferences.......................14 Optional UNO-S1 Keypad .............................15 UNO-S1 User Menu - Setting Preferences.......................16 INSTALLER SECTION Getting Started Unpacking ................................18...
  • Page 4 TABLE OF CONTENTS RNET Link In/Out - Multiple Controllers........................40 RNET Link In/Out - RNET-enabled Components .......................41 RS-232 Interface ..............................42 Programming Center Keypad Port Connection......................43 Firmware Updates UNO-S2 Keypad Diagnostic Menu ..........................44 UNO-S2 Keypad Firmware Update Procedure ......................45 CAV6.6 Firmware Update Procedure........................46 PC Power Tool Programming..........................47 Initial Install Test ...............................48 Programming...

  • Page 5: User Section

    USER SECTION Component Guides Explains front panel features of the CAV6.6 controller, UNO-S2 keypad, optional UNO-S1 keypad and SRC2 remote control. Operation Step-by-step outline of the system's normal operation, plus a look at adjustable features available through the User Menu.

  • Page 6: Product Introduction

    Here at Russound we are proud to continue providing innovative and intuitive A/V product solutions to the world. When you link the industry-leading CAV6.6-S2 system with Russound’s commitment to its...

  • Page 7: Component Guide

    USER COMPONENT GUIDE CAV6.6 Controller-Front Panel MAIN POWER SWITCH - Supplies power to the CAV6.6 REMOVABLE COVER LENS - Covers the connections on the front of the CAV6.6 ROOM LED ON/OFF INDICATORS - Indicates when a room is on (green) or off (red) ROOM LABEL WINDOW - Holds the selected room Label (included) AUX A/V LINE INPUTS - Supports connection of a seventh A/V source to the CAV6.6 AUX IR OUT PORT - Connects IR emitter for IR control of the Aux A/V source component...
  • Page 8 Connect the accepts an IR Emitter with a 1/8” plug (e.g., Left, Right, and Video Input Connectors to the Russound 845.1 IR emitter). The emitter’s other source component using quality RCA signal end attaches to the IR window of the component cables.

  • Page 9: Uno-S2 Keypad

    USER COMPONENT GUIDE UNO-S2 Keypad-Front Panel LCD PANEL - 12-character backlit display shows status of the room, source, volume, and more SOURCE SELECT BUTTON - Scrolls through the sources directly connected to the CAV6.6. Press and hold brings up the USER MENU for loudness, bass, treble, etc. VOLUME UP/DOWN BUTTONS - Raises and lowers the volume for the room IR RECEIVER - Receives IR signals and passes them to the controller and source equipment.

  • Page 10: Uno-S1 Keypad

    USER COMPONENT GUIDE Optional UNO-S1 Keypad-Front Panel 102.5 LCD PANEL - 5-character backlit display shows source, volume and room status (messages scroll, then display first 5 characters of message) SOURCE SELECT - Scrolls through the available sources. Press and hold brings up the USER MENU for loudness, bass, treble, etc.

  • Page 11: Src2 Remote Control

    (e.g., VCR, DVD, or CD player) with these buttons. SOURCE - Directly select sources connected to the Russound controller while in the Russound mode. F1 AND F2 BUTTONS - Selects and saves Favorite 1 or Favorite 2 preset selections.

  • Page 12: Cav6.6 Controller

    USER OPERATION CAV6.6 Controller Main Power and Zone Status The power switch for the CAV6.6 controller is "on" in the up position. Any active room is indi- cated on the front of the controller by a green backlit label, which shows red when the room is inactive.

  • Page 13: Uno-S2 Keypad Button Functions

    USER OPERATION UNO-S2 Keypad Button Functions Zone On/Off is also used to enter the User Menu with a Press and release to turn on the UNO press and hold action. (See next page for User System Keypad. This also turns on the corre- Menu) sponding CAV6.6’s room, and any presets previ- Volume Up/Down Buttons...

  • Page 14: Uno-S2 User Menu - Setting Preferences

    USER OPERATION UNO-S2 User Menu - Setting Preferences The User Menu allows the user to adjust the 7. DO NOT DSTRB - On or Off (default) audio properties and control functions of a par- Do Not Disturb means do not disturb this room ticular room.

  • Page 15: Optional Uno-S1 Keypad

    USER OPERATION Optional UNO-S1 Keypad Button Functions The optional UNO-S1 keypad operates in a panel. When a source is selected in more than similar manner as the UNO-S2 keypad. one room, the “SHARED” icon will appear on all UNO Keypads using that source. is also Zone On/Off used to enter the User Menu with a press and...

  • Page 16: Uno-S1 User Menu - Setting Preferences

    USER OPERATION Optional UNO-S1 User Menu - Setting Preferences The UNO-S1 User Menu allows the user to Party Mode command from affecting this room. adjust the audio properties and control func- When another UNO Systems Keypad selects the tions of a particular room. same source, a DND message will scroll on the the LCD panel, alerting the user the source is in To enter or exit the User Menu, press and hold...

  • Page 17: Installer Section

    INSTALLER SECTION Getting Started Includes an installation overview, including tools needed and wiring instructions. Component Guides Reviews front and back panel features of the CAV6.6 controller and the UNO-S2 keypad. Keypad Installation Explains UNO-S2 keypad installation and wiring. Making Connections Details front and back panel connections of the controller and the keypad.

  • Page 18: Getting Started

    A-BUS sub- you encounter any concealed damage, con- zones are only available for zones 1 - 4. The A- sult your Russound dealer before proceeding KP2 amplified keypad can provide direct source to install the unit. selection for only the first four sources when in ‘Multi’...

  • Page 19: Wiring Instructions

    INSTALLER WIRING INSTRUCTIONS RJ-45 Connections The CAT-5 T568A wiring stan- dard shown on the right is used for the RJ-45 terminations. Keypad Wiring For the UNO keypad, the following connections • Confirm ahead of time that you can drill an are used to terminate the CAT-5 wire to the 110 outlet hole easily and in an unobtrusive spot punchdown on the keypad:...

  • Page 20: Component Guide

    INSTALLER COMPONENT GUIDE CAV6.6 Controller-Front Panel...
  • Page 21 INSTALLER COMPONENT GUIDE CAV6.6 Controller-Front Panel PROGRAM SELECTOR COVER - Protects the Program Selector Switch KEYPAD PROGRAMMING PORT - Accepts an RJ-45 terminated UNO keypad to program certain features of the CAV6.6 FRONT/REAR RS-232 SWITCH - Selects front or rear RS-232 connection for optional PC connection during programming RS-232 INTERFACE - The RS-232 Interface on the front and on the rear, allows the zones to be controlled by PC or other devices that have an RS-232 Interface.

  • Page 22: Cav6.6 Controller Rear Panel

    UNO KEYPAD PORTS - One UNO Keypad Port for each of the six CAV6.6 Zones 24VDC 2.5A INPUT - Provides power to the A-BUS READY SUB-ZONES when used with a 24VDC 2.5A power supply (e.g., Russound A-PS) ZONE AUDIO/VIDEO OUTPUTS - Variable line audio with fixed video, used to connect...
  • Page 23 A-BUS READY SUB-ZONES - A-BUS Amplified Control Modules and Hubs can be added for additional sub-zones of audio (Zones 1 to 4 only) RNET LINK IN AND LINK OUT - Links multiple CAV6.6’s, also links future Russound components that are RNET compatible RS-232 INTERFACE - The RS-232 Interface on the rear and on the front, allows the zones to be controlled by PC or other devices that have an RS-232 Interface.

  • Page 24: Uno-S2 Keypad Front Panel

    INSTALLER COMPONENT GUIDE UNO-S2 Keypad-Front Panel DATA Rx (RS-232) DATA Tx (RS-232) +12VDC SETUP BUTTON - Activates Installer Setup Mode for the UNO-S2 keypad OS UPDATE PORT - Port used for UNO keypad OS software updates...

  • Page 25: Uno-S2 Keypad Rear Panel

    INSTALLER COMPONENT GUIDE UNO-S2 Keypad-Rear Panel EXTERNAL IR RECEIVER IN CONNECTOR - Connection for an external IR Receiver. OS UPDATE JUMPER - Selects “Run” or “OS Update” mode. RESET BUTTON - Reset whenever changing from RUN to OS update 110 PUNCHDOWN CONNECTOR - Termination for CAT-5 connection between the UNO-S2 Keypad and the CAV6.6 controller.

  • Page 26: Uno-S2 Keypad Installation

    INSTALLER UNO-S2 KEYPAD-INSTALLATION Keypad Location The best infrared remote performance is achieved Route CAT-5 wire to the junction box from the with the keypad away from any direct sunlight, CAV6.6. plasma TV, and low voltage lighting controls. Also Use the supplied 110 punchdown tool to con- consider convenience when choosing a location.

  • Page 27: Keypad Connections

    Punchdown terminals require the use of available online through the Document Center at a punchdown tool which has been provided with www.russound.com. Look for the Technical the keypad kit. Attach the CAT-5 cable to the Documents under Multi-source/Multi-room prod- 110 punchdown terminal on the UNO-S2 Keypad ucts.

  • Page 28: Ir Receiver Connection

    In terminal for connecting an external IR receiver NAL) and the other pair connecting ST (STATUS) such as the Russound SaphIR 858, 862 Eye, or and V+ (+12VDC). If the wire has a shield, con- 860 Phantom. Use 2 twisted pair wire with nect it to ground at the UNO-S2 only.

  • Page 29: Making Connections

    INSTALLER MAKING CONNECTIONS UNO System Keypad Port Connection The UNO System Keypad Ports are located on CAT-5 from the RJ-45 Wall Plate to the keypad. the back of the CAV6.6 in the top left corner. If using more than one keypad on a zone, con- Connections made at the UNO Keypad Ports are nect a SA-ZX3 UNO System Keypad Splitter made using CAT-5 T568A RJ-45 wire configura-...

  • Page 30: Source Audio/Video Input Connections

    MAKING CONNECTIONS Source Audio/Video Input Connections The CAV6.6 supports up to six audio/video 1. Using an IR emitter (the Russound 845.1 is sources. The Source Inputs are located at the recommended) attach the end of the emitter back panel. Connect each source output using ”...

  • Page 31: Source Audio/Video Loop Output Connection

    INSTALLER MAKING CONNECTIONS Source Audio/Video Loop Output Connections The CAV6.6 has six buffered, fixed-level sources in a multiple controller system. audio/video source loop outputs. This source loop The Source Loop Outputs are located directly to configuration allows the CAV6.6 to pass source the right of the Source Audio/Video Inputs.

  • Page 32: Speaker Connections

    INSTALLER MAKING CONNECTIONS Speaker Connections The speakers are connected to the CAV6.6 WHITE -- L+ (left channel positive) using modular snap speaker connectors. Each GREEN -- L- (left channel negative) of these color coded connectors is designated for the speaker set of a particular amplified BLACK -- R- (right channel negative) zone.

  • Page 33: Accessory Ir Connection

    The Accessory IR jack on the rear of the CAV6.6 845.1 single IR emitter is recommended, or use allows control of any source equipment without an IR connecting block such as the Russound that source being selected on the keypad. The 857 which allows multiple units to be controlled connection for the ACC IR jack is made using an through the ACC IR Port.

  • Page 34: Zone Audio/Video Outputs

    Use quality RCA signal cables to ensure a con- The Variable Audio outputs can be used if addi- stant quality Audio signal. Video for the zone will tional amplification is desired (e.g., Russound be routed via the Video connection. R235LS two-channel amplifier). The Zone...

  • Page 35: A-Bus Ready Sub-Zone Connection

    INSTALLER MAKING CONNECTIONS A-BUS Ready Sub-zone Connection A-BUS products can easily expand the CAV6.6 port to an RJ-45 wall plate (optional) for a clean audio system by adding A-BUS Ready Sub-zones installation. Using the same T568A RJ-45 wiring to the first four CAV6.6 zones. The A-BUS Ready configuration, attach CAT-5 from the RJ-45 wall Sub-zones are located on the back of the plate to an A-BUS hub or amplified control mod-...

  • Page 36: 12Vdc Trigger In/Out

    Power Management of the audio/video sources engage any 12VDC trigger device or component possibly being shared with a home theater sys- such as the Russound ACT-1 triggered outlet. tem. When the source equipment is off and The connections for the trigger out are made 12VDC is provided to the trigger, the sources will using a two-conductor cable with 1/8”...

  • Page 37: Zone Trigger Out

    12VDC Trigger In/Out Zone 12VDC Trigger Outputs Zone 12VDC Triggers are located directly under Russound R235LS amplifier. The connections for the UNO Keypad Ports. The 12VDC Trigger is the trigger outputs are made using a two-con- engaged when the corresponding zone is turned ductor cable with 1/8”...

  • Page 38: Page Trigger In/Out

    Russound DIM-1 Doorbell Interface this interference. Two to three turns of the con- Module. The CAV6.6 can be programmed to necting cable through the bead may be needed.
  • Page 39 INSTALLER MAKING CONNECTIONS 12VDC Trigger In/Out...

  • Page 40: Rnet Link In/Out - Multiple Controllers

    INSTALLER MAKING CONNECTIONS RNET Link In and Link Out - Multiple Controllers The RNET Link In and Link Out is used to con- Note: If two or more CAV6.6 controllers will be nect two or more (up to 6) CAV6.6 or CAM6.6 connected using the RNET Link In and Link Out controllers.

  • Page 41: Rnet Link In/Out - Rnet-Enabled Components

    RNET Link In and Link Out - RNET-enabled Components The RNET Link In and Link Out is also used to RNET-enabled components fully integrate with connect the CAV6.6 to other Russound CAV6.6 and CAM6.6 multi-zone systems. They RNET-enabled products. The connection is made...

  • Page 42: Rs-232 Interface

    For RS-232 protocol, available firmware updates and the RNET Backup Utility, see the Document The two RS-232 com ports are located on the Center at www.russound.com. Look for the front and the back of the CAV6.6 and use a Technical Documents under Multi-source/Multi- DB-9 cable connection.

  • Page 43: Programming Center Keypad Port Connection

    INSTALLER MAKING CONNECTIONS Programming Center Keypad Port Connection The CAV6.6 can be programmed via keypad cally for learning IR commands directly into the connection using CAT-5 and the T568A RJ-45 IR receiver on the controller’s front panel. (see wire configuration. An UNO-S2 Keypad can be Learn IR flow chart on page 75).

  • Page 44: Firmware Updates

    INSTALLER FIRMWARE UPDATES UNO-S2 Keypad Diagnostics Menu The Diagnostics Menu allows the installer to run menus are outlined in the diagram below. a diagnostic check on the keypad and to verify When finished, press and release the Setup but- the firmware version. The Diagnostics Menu also ton again (except for the Update Firmware where contains the update firmware procedure for the power must be cycled).

  • Page 45: Uno-S2 Keypad Firmware Update Procedure

    (baud rate= 38400, data bits = 8, COM port and the keypad Update port. no parity, 1 stop bit, no flow control) Verify all connections. 3. UNO serial Programming Cable (Russound P/N Flash Magic Required Settings: 2500-121036 Section 1: 4. Flash Magic - Philips IC update application...

  • Page 46: Cav6.6 Firmware Update Procedure

    Remove cover lens from CAV6.6 front panel. Disconnect the Programming Cable from the controller and the PC. Remove the “Russound” program selector switch cover with a small flat blade screwdriver. Re-position the OS Program selector switch to “Run.” Connect the DB9 serial cable between the PC COM...

  • Page 47: Pc Power Tool Programming

    INSTALLER PC POWER TOOL OVERVIEW PC Power Tool Programming The PC Power Tool is a custom software pro- To upload the file, connect a DB9 serial cable gram that provides an easy way to program the between the PC COM port and either the front or CAV6.6 using a PC to upload the program set- rear DB9 connection on the CAV6.6.

  • Page 48: Initial Install Test

    4. Check to see that the keypad is connected to the Zone #1 Keypad Port and verify the CAT-5 is properly terminated at both ends. If none of these steps produce successful results, call Russound Tech Support for further assistance.

  • Page 49: Programming

    INSTALLER PROGRAMMING System Programming Overview This manual includes items that are designed to assist in the programming process. Sample Configurations (Pages 84-95) A series of sample configurations are provided to showcase a variety of system designs and compo- nent options. Forms (pages 51-53) Three blank reproducible forms are included as planning tools when determining sources, settings and zone preferences.

  • Page 50: System Programming Overview

    INSTALLER PROGRAMMING System Programming Overview (cont’d) 2. Number of Sources (# of Sources/SOURCE SETUP) (Page 61) This procedure sets the number of sources used in the system. This prevents the user from selecting a source input that is not used. 3.

  • Page 51: Source Information Form

    INSTALLER PROGRAMMING Source Information Form...

  • Page 52: Zone Information Form

    INSTALLER PROGRAMMING Zone Information Form...

  • Page 53: Macro Editor Form

    INSTALLER PROGRAMMING Macro Editor Form...

  • Page 54: Installation Menu

    INSTALLER INSTALLATION MENU There are three item types in the installation menu: Menu Item – Acts as a folder that holds procedures and/or feature parameters. Procedure – A sequence of feature parameters to perform a guided operation, such as configuring an UNO key. Once you begin a procedure, the system will prompt for the needed information to complete the task.

  • Page 55: Source Setup

    INSTALLER INSTALLATION MENU The following items make up the Installation Menu: SOURCE SETUP (SrcSu) ZONE SETUP (ZonSu) CTRLR SETUP (CtlSu) POWER MGT (PwMgt) LEARN IR (LrnIR) MACRO EDITOR (MacEd) SYSTEM INFO (SInfo) SOURCE SETUP (SrcSu) Source Setup allows the system’s sources to be configured. The following items can be found in the SOURCE SETUP menu: BASIC SETUP (BasSu) KEY CONFIG (KeyCf)

  • Page 56: Basic Setup

    INSTALLER INSTALLATION MENU Basic Setup (cont’d.) ii. TEMPLATE TYP – Select the template type to define what type of source compo- (TType) nent is being used. (This will tell the CAV 6.6 how to configure the key commands and text for the source component if it is a learned source.) Procedure advances to USE NUM IR? (step 7).
  • Page 57 INSTALLER INSTALLATION MENU Key Config (cont’d.) 2. SOURCE NUM – Select the source the key will be configured for. (Src #) 3. SELECT A KEY – Using , select the keypad key to be configured. (SelKy) 4. KEY TYPE – Either “Key Press,”...
  • Page 58 INSTALLER INSTALLATION MENU SOURCE NAMES (SrcNm) This procedure allows the installer to customize the source names for the sources attached to the CAV6.6. See Source Setup Menu on Page 55 and Source Names/Vol Trim - Flow Chart on page 69 1.
  • Page 59 INSTALLER INSTALLATION MENU Numeric IR (cont’d) a. Selected: Learned IR Choose Learned IR if the pre-programmed IR code library does (LrnIR) not support the source component. i. LEARNED SRC – Select the learned source bank to be assigned to the source (LnSrc) component.
  • Page 60 INSTALLER INSTALLATION MENU Numeric IR (cont’d) i. MACRO - Macro loads a series of commands which are processed when (Macro) activated. ii. MACRO ID – Enter the macro ID number. Menu advances to SAVE CHANGES (MacID) (step 13) e. All Other Selections: Procedure advances to DEVICE CODE (step 11) 11.

  • Page 61: Zone Setup

    INSTALLER INSTALLATION MENU Source Select Command (cont’d) e. All Other Selections: Procedure advances to DEVICE CODE (step 3) 3. DEVICE CODE – Source component code for IR control. (DevCd) 4. KEY FUNCTION – Select a function (Play, Enter, etc.). (KeyFn) 5.

  • Page 62: Controller Setup

    INSTALLER INSTALLATION MENU Zone Setup (cont’d) 5. PAGE ENABLE - This feature is either disabled or enabled. It allows the option of (PagEn) receiving or blocking a page in a zone. If disabled, the page will not be sent to the zone. If enabled (default), the page will be sent to the zone.

  • Page 63: Power Management

    INSTALLER INSTALLATION MENU Power Management (cont’d) one minute after that. This timeout is postponed for as long as the home theater trigger input has 12VDC present. See Installation Menu on Page 55 and Power Management - Flow Chart on page 74 1.

  • Page 64: Learn Ir

    INSTALLER INSTALLATION MENU Power Management (cont’d) 7. POWER OFF CMD – Tells the controller to turn off the selected source equipment (by (OfCmd) SOURCE NUMBER) when the last of the UNO System Keypads is turned off. If “no,” procedure advances to SAVE CHANGES (step 11) 8.

  • Page 65: Macro Editor

    INSTALLER INSTALLATION MENU Learn IR (cont’d) 1. LEARNED SRC – Select the source whose commands will be learned into the con- (LnSrc) troller. 2. KEY FUNCTION – Select the function to be learned or deleted. (KeyFn) 3. LEARN/DELETE – Select Learn IR Now or Delete IR. If Learn IR Now, a “USE (Ln/Dl) REMOTE”...

  • Page 66: System Info

    INSTALLER INSTALLATION MENU Macro Editor (cont’d) i. LEARNED SRC – Select the learned source bank to be assigned to the source (LnSrc) component. Procedure advances to KEY FUNCTION (step 6) b. Selected: Unassigned Selected command and subsequent commands are cleared. (Unasg) Procedure advances to COMMAND NUM (step 3) c.

  • Page 67: Setup Menu Flow Charts

    INSTALLER SETUP MENU FLOW CHARTS Source Setup: Basic Setup...
  • Page 68 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Key Configuration...
  • Page 69 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Source Names/Volume Trim...
  • Page 70 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Numeric IR...
  • Page 71 INSTALLER SETUP MENU FLOW CHARTS Source Setup: Source Select Command/# of Sources...
  • Page 72 INSTALLER SETUP MENU FLOW CHARTS Zone Setup...
  • Page 73 INSTALLER SETUP MENU FLOW CHARTS Controller Setup...
  • Page 74 INSTALLER SETUP MENU FLOW CHARTS Power Management...
  • Page 75 INSTALLER SETUP MENU FLOW CHARTS Learn IR...
  • Page 76 INSTALLER SETUP MENU FLOW CHARTS Macro Editor...

  • Page 77: Setup Menu Flow Charts

    INSTALLER SETUP MENU FLOW CHARTS System Info...

  • Page 78: Reference Section

    Russound products. IR Keycodes List of key functions identifies what IR codes are supported for each command type (source) by the built-in library. Technical Specifications Product specifications for CAV6.6 controller and UNO-S2 keypad. Warranty Russound product warranty terms and conditions.
  • Page 79 IR CODES Device Codes for TVs: 0180, 0030 Signature 0016 Kenwood 0030, 0019 Sony 0000, 1100 Konka 0628, 0632, 0638, 0703, 0707 Soundesign 0180, 0178, 0179 0030, 0019 0056 Squareview 0171 Admiral 0093, 0463 0047, 0747, 0054, 0154, 0156, Starlite 0180 Advent 0761...
  • Page 80 IR CODES Philips 1818, 1061 Dynatech 0000 Protec 0072 Pioneer 1010 Electrohome 0037 Pulsar 0039 Princeton 0113, 0295 Electrophonic 0037 Quasar 0035, 0162, 1162, 0454, 1035 Samsung 1190, 1204 Emerex 0032 0035, 0060, 0760, 0048, 1035, 1060, 0807, 0149, 0042, 0240 Sensory Science 1126 Emerson 0037, 0184, 0000, 0121, 1278,...
  • Page 81 Aiwa 0157 One For All 0167 Device Codes for Tuner/Amp: Cal i f orni a Audi o Labs 0029 RadioShack 0240 Carver 0157, 0179 Russound 1232, 1233 0531 Classic 1297 Sanyo 0336 Aiwa 1089, 1405, 0158, 1388 0000 Security System 0167...

  • Page 82: Source Names

    SOURCE NAMES UNO-S1 UNO-S2 UNO-S1 UNO-S2 UNO-S1 UNO-S2 CustomName3 DVD 3 DVD Player 3 Aux 1 AUX 1 CustomName4 FDoor Front Door Aux 2 AUX 2 CustomName5 Hers Her Music Blues Blues CustomName6 His Music Cable Cable CustomName7 www. Intrnet Radio Cbl 1 Cable 1 CustomName8...
  • Page 83 SOURCE NAMES UNO-S1 UNO-S2 UNO-S1 UNO-S2 RepTV ReplayTV Tun 1 Tuner 1 Rock Rock Tun 2 Tuner 2 Satellite Tun 3 Tuner 3 Sat 1 Satellite 1 Sat 2 Satellite 2 Sat 3 Satellite 3 VCR 1 VCR 1 SatRd Sat Radio VCR 2 VCR 2...

  • Page 84: Sample System Configurations

    SAMPLE SYSTEM CONFIGURATION 1 Six Zones and Six Sources The configuration shows how the CAV6.6 distrib- IR Remote control through Keypad utes audio/video throughout the house using six To control the source components via IR from UNO System Keypads and six audio/video the UNO-S2 Keypad, an IR emitter must be con- source components.
  • Page 85 SAMPLE SYSTEM CONFIGURATION 1 Six Zones and Six Sources...

  • Page 86: Integrate Multiple Cav6.6'S

    SAMPLE SYSTEM CONFIGURATION 2 Integrate Multiple CAV6.6’s This configuration uses an additional CAV6.6 to Keypads add six additional amplified zones, controlled This configuration uses a single UNO-S2 Keypad through UNO-S2 Keypads. The source compo- per zone on each of the CAV6.6s. Each keypad nents are connected to both CAV6.6s with RCA is connected to the UNO System Keypad Port cables using the source in/loop out to intercon-...

  • Page 87: Integrate Multiple Cav6.6'S

    SAMPLE SYSTEM CONFIGURATION 2 Integrate Multiple CAV6.6’s...

  • Page 88: Zone Keypad Expansion

    T568A configuration. er. The SA-ZX3 requires a 12VDC 1A power sup- To connect from the SA-ZX3 to an RJ-45 wall ply, such as the Russound 1201A Power Supply. plate (optional), use the patch cables to wire for Components List: 1 - CAV6.6 Controller...
  • Page 89 SAMPLE SYSTEM CONFIGURATION 3 Zone Keypad Expansion...

  • Page 90: A-Bus Ready Sub-Zone Addition

    IR The A-H2 requires a 24VDC 2.5A Power Supply remote. such as the Russound A-PS power supply. Mount Speakers the A-H2 near the CAV6.6 and source equipment The speakers for the A-BUS Ready Sub-Zone are using screws or hook and loop fastener.

  • Page 91: A-Bus Ready Sub-Zone Addition

    SAMPLE SYSTEM CONFIGURATION 4 A-BUS Ready Sub-Zone Addition TATUS OWER 12VDC 100mA 24VDC 2A EWMARKET , NH U.S.A. , 1-S OURCE URFACE OUNT UDIO EYPAD UTPUTS YPASS TATUS IR C ONFIRM UDIO IR E MITTERS XPANSION A-H2 NPUT...

  • Page 92: Additional Amplification

    SAMPLE SYSTEM CONFIGURATION 5 Additional Amplification Additional amplification can be added to the CAV6.6 zones 2 through 6 have the outputs connected to when more power or more speakers are desired. the inputs of an external amplifier. The speakers for these zones are run to the output of the exter- This configuration adds an external amplifier to nal amplifier for each of these zones.

  • Page 93: Additional Amplification

    SAMPLE SYSTEM CONFIGURATION 5 Additional Amplification R1250MC R 1 2 5 0 M C P O W E R M P L I F I E R...

  • Page 94: Home Theater

    SAMPLE SYSTEM CONFIGURATION 6 Home Theater Home Theater systems can share sources with Keypads a CAV6.6 Controller to provide additional listen- Three UNO-S2 Keypads are connected to the ing and viewing options. In this configuration, CAV6.6 Controller using the CAT-5 T568A RJ-45 the Home Theater Receiver provides a 12VDC wiring configuration.
  • Page 95 SAMPLE SYSTEM CONFIGURATION 6 Home Theater...

  • Page 96: Ir Key Code List

    INSTALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) Digit 1 Pause Pause Learned Only Digit 2 Record Recrd Learned Only Digit 3 Menu Menu Menu (Picture) Digit 4 Menu Up MenuU Menu Up, Adjust Up Digit 5 Menu Dn MenuD...
  • Page 97 INSTALLER KEY CODES TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) KEY FUNCTION UNO-S1 TV (HDTV) Off, Power On/Off PIP Chan Up PIPCU PIP Channel Up Learned Only PIP Chan Dn PIPCD PIP Channel Down Learned Only Input 1 In 1 VID1,Video,TVp1 Learned Only Input 2...
  • Page 98 INSTALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE KEY FUNCTION UNO-S1 CABLE Digit 1 Pause Pause Pause Digit 2 Record Recrd Record Digit 3 Menu Menu Menu, Settings Digit 4 Menu Up MenuU Menu Up Digit 5 Menu Dn MenuD Menu Down Digit 6 Menu Left...
  • Page 99 INSTALLER KEY CODES CABLE KEY FUNCTION UNO-S1 CABLE KEY FUNCTION UNO-S1 CABLE Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Learned Only Input 1 In 1 A,VID1,Video,TVp1 Learned Only Input 2 In 2 B,VID2,TVp2 Learned Only...
  • Page 100 INSTALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC Digit 1 Pause Pause Pause Digit 2 Record Recrd Record Digit 3 Menu Menu Menu, Home Digit 4 Menu Up MenuU Menu Up Digit 5 Menu Dn MenuD Menu Dn...
  • Page 101 INSTALLER KEY CODES VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC KEY FUNCTION UNO-S1 VIDEO ACC Off, Power On/Off PIP Chan Up PIPCU PIP Channel Up Learned Only PIP Chan Dn PIPCD PIP Channel Down Learned Only Input 1 In 1 VID1,Video,TVp1 Learned Only Input 2...
  • Page 102 INSTALLER KEY CODES SAT/DSS KEY FUNCTION UNO-S1 SAT/DSS KEY FUNCTION UNO-S1 SAT/DSS Digit 1 Pause Pause Pause Digit 2 Record Recrd Record Digit 3 Menu Menu Menu (PVR, Tivo) Digit 4 Menu Up MenuU Menu Up Digit 5 Menu Dn MenuD Menu Down Digit 6...
  • Page 103 INSTALLER KEY CODES SAT/DSS KEY FUNCTION UNO-S1 SAT/DSS KEY FUNCTION UNO-S1 SAT/DSS Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Learned Only Input 1 In 1 VID1,Video,TVp1 Learned Only Input 2 In 2 VID2,TVp2 Learned Only...
  • Page 104 INSTALLER KEY CODES KEY FUNCTION UNO-S1 KEY FUNCTION UNO-S1 VCR Pause Pause Pause Digit 1 Record Recrd Record Digit 2 Digit 3 Menu Menu Menu (PVR,Tivo) Menu Up MenuU Menu Up Digit 4 Menu Dn MenuD Menu Down Digit 5 Menu Left MenuL Menu Left...
  • Page 105 INSTALLER KEY CODES KEY FUNCTION UNO-S1 VCR KEY FUNCTION UNO-S1 VCR Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Learned Only Input 1 In 1 VID1,Video,TVp1 Learned Only Input 2 In 2 VID2,TVp2 Learned Only Input 3...
  • Page 106 INSTALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC KEY FUNCTION UNO-S1 LASER DISC Digit 1 Pause Pause Pause Digit 2 Record Recrd Learned Only Digit 3 Menu Menu Menu, Program Digit 4 Menu Up MenuU Menu Up 5Digit 5 Menu Dn MenuD Menu Down 6Digit 6...
  • Page 107 INSTALLER KEY CODES LASER DISC KEY FUNCTION UNO-S1 LASER DISC KEY FUNCTION UNO-S1 LASER DISC Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Learned Only Input 1 In 1 VID1,Video,TVp1 Learned Only Input 2 In 2 VID2,TVp2...
  • Page 108 INSTALLER KEY CODES KEY FUNCTION UNO-S1 DVD KEY FUNCTION UNO-S1 DVD Digit 1, Traack 1 Pause Pause Pause Digit 2, Track 2 Record Recrd Record Digit 3, Track 3 Menu Menu Disk Menu Digit 4, Track 4 Menu Up MenuU Menu Up Digit 5, Track 5 Menu Dn MenuD Menu Dn...
  • Page 109 INSTALLER KEY CODES KEY FUNCTION UNO-S1 DVD KEY FUNCTION UNO-S1 DVD Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Learned Only Input 1 In 1 VID1,Video,TVp1 Learned Only Input 2 In 2 VID2,TVp2 Learned Only Input 3...
  • Page 110 INSTALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER KEY FUNCTION UNO-S1 RECEIVER Pause Pause Pause Digit 1 Record Recrd Record Digit 2 Digit 3 Menu Menu Disk menu, Menu Menu Up MenuU Menu Up, Adjust Up Digit 4 Menu Dn MenuD Menu Dn, Adjust Dn Digit 5...
  • Page 111 INSTALLER KEY CODES RECEIVER KEY FUNCTION UNO-S1 RECEIVER KEY FUNCTION UNO-S1 RECEIVER Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Learned Only Input 1 In 1 Learned Only Input 2 In 2 Tuner Learned Only Input 3...
  • Page 112 INSTALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO Digit 1 Pause Pause Pause Digit 2 Record Recrd Record Digit 3 Menu Menu Menu, Program Digit 4 Menu Up MenuU Menu Up, Adjust Up Digit 5 Menu Dn MenuD...
  • Page 113 INSTALLER KEY CODES AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO KEY FUNCTION UNO-S1 AMP/MISC AUDIO Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 Learned Only Learned Only Input 2 In 2 Tuner...
  • Page 114 INSTALLER KEY CODES KEY FUNCTION UNO-S1 CD KEY FUNCTION UNO-S1 CD Pause Pause Pause Digit 1, Track 1,Dsc1 Record Recrd Record Digit 2, Track 2,Dsc2 Menu Menu Disk, Edit Digit 3, Track 3,Dsc3 Menu Up MenuU Menu Up Digit 4, Track 4,Dsc4 Menu Dn MenuD Menu Down Digit 5, Track 5,Dsc5...
  • Page 115 INSTALLER KEY CODES KEY FUNCTION UNO-S1 KEY FUNCTION UNO-S1 Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 Learned Only Learned Only Input 2 In 2 Tuner Learned Only Input 3 In 3 DVD, LD...
  • Page 116 INSTALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL Pause Pause Pause Digit 1 Record Recrd Record Digit 2 Digit 3 Menu Menu Menu Menu Up MenuU Menu Up, Mode Digit 4 Menu Dn MenuD Menu Dn, Timer Digit 5...
  • Page 117 INSTALLER KEY CODES HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL KEY FUNCTION UNO-S1 HOME CONTROL Off, Power On/Off PIP Chan Up PIPCU Learned Only Learned Only PIP Chan Dn PIPCD Learned Only Input 1 In 1 Source/Scene 1 Learned Only Learned Only Input 2 In 2...

  • Page 118: Technical Specification

    TECHNICAL SPECIFICATION CAV6.6 Controller/Amplifier Dimensions: 17"W x 12"D x 3.5"H (43 x 30.5 x 9 cm) Weight: 18 lbs. (8.1 kg) Power Supply: 110 or 240 VAC Fuse Rating: 110V input; F3A H 250V US and Canada 240V input; F1.25A H 250V Europe Frequency Response: 20Hz-20kHz +/- 0.5dB Watts per channel:...

  • Page 119: Warranty

    In these cases, repairs will be made on the basis of the retail value of the parts and labor. To return for repairs, the unit must be shipped to Russound at the owner's expense, along with a note explaining the nature of service required. Be sure to pack the unit in a corrugated container with at least three (3) inches of resilient material to protect the unit from damage in transit.
  • Page 120 CAV6.6-S2 System 6-Zone, 6-Source Audio/Video Controller Amplifier INSTRUCTION MANUAL Russound 5 Forbes Road, Newmarket, NH 03857 tel 603.659.5170 • fax 603.659.5388 11/22/05 Rev. 4 28-1143 e-mail: tech@russound.com Copyright © 2004-2005 Russound ® . All rights reserved. www.russound.com...

This manual is also suitable for:

Cav6.6-s2

Table of Contents