Completing The Installation; Reinstalling The Two-Piece Bezel - IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual

If you have other devices to install or remove, do so now; otherwise, go to

"Completing the installation."

Completing the installation
To complete the installation, you must reinstall the two-piece bezel, reinstall the side
cover, connect all the cables and, for some devices, run the Configuration/Setup
Utility program. Follow the instructions in this section.

Reinstalling the two-piece bezel

To reinstall the two-piece bezel, complete the following steps:
1. Install the upper bezel on the front of the server chassis:
52
System x3200 M2 Types 4367 and 4368: User's Guide
a. Insert the two right-side tabs on the upper bezel into the matching holes on
the right side of the chassis.
b. Rotate the upper bezel to the left side of the chassis and press the bezel
clips into the matching indentations on the left side of the chassis until the
bezel clips snap into place.