Installing The Remote Supervisor Adapter Ii Slimline Firmware - IBM 436854u - System x3200 M2 5U Mini Tower Server User Manual

To connect the Ethernet cables, complete the following steps:
1. Connect one end of a Category 3 or Category 5 Ethernet cable to the dedicated
2. To make sure that the network connection is working, check the Ethernet LEDs.

Installing the Remote Supervisor Adapter II SlimLine firmware

The software and firmware files that you need are contained in one system service
package installation kit. The kit contains the following files:
v Software and firmware installation instructions
v BIOS code update with support for the Remote Supervisor Adapter II SlimLine
v Diagnostics code update
v Remote Supervisor Adapter II SlimLine device drivers
v Remote Supervisor Adapter II SlimLine firmware update
v Integrated service processor firmware update
v Video device driver
v Firmware-update utility program
To download and install the software and firmware, complete the following steps.
72
System x3200 M2 Types 4367 and 4368: User's Guide
Table 12. Cabling tasks to enable remote access to the Remote Supervisor Adapter II
SlimLine
User interface to Remote Supervisor
Adapter II SlimLine
ASM Web-based interface using HTTP
Text-based interface using Telnet
Ethernet connector for the Remote Supervisor Adapter II SlimLine. Connect the
other end of the cable to the network. The following illustration shows the
locations of the Ethernet connectors.
The following illustration shows the locations of the LEDs.
Power cord
AC power LED
DC power LED
Serial 2 (Com2)
Parallel
Serial 1 (Com1)
Video
USB 3 and 4
Ethernet
connector
USB 1 and 2
Remote
Supervisor
Adapter II
SlimLine
(Ethernet)
Connection to Remote Supervisor
Adapter II SlimLine
LAN using the Ethernet connector
Ethernet transmit/
receive activity LED
(amber)
Ethernet link
status LED
(green)