South Bridge Configuration - Asus DSEB-D16 Series User Manual

South Bridge Configuration

The SouthBridge Configuration menu allows you to change the Southbridge
settings.
Advanced
South Bridge Chipset Configuration
ESB2 PCI-X Hub Configuration
ESB2 PCI-X Hub Configuration
Advanced
Configure advanced settings for ESB2 PCI-X Hub
PCI Bus Frequency
I/O Port Decode
RAS Sticky Error Handling
VGA 16-Bit Decode
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
PCI Bus Frequency [Auto]
Allows you to select the PCI bus speed. When you set this item to [Auto], the
device will run at the speed based on its capability.
Configuration options: [Auto] [33 Mhz PCI] [66 Mhz PCI] [66 Mhz PCI-X M1]
[100 Mhz PCI-X M1] [133 Mhz PCI-X M1] [66 Mhz PCI-X M2]
[100 Mhz PCI-X M2] [133 Mhz PCI-X M2]
I/O Port Decode [4K Decode]
Allows you to select the decode range for I/O ports.
Configuration options: [4K Decode] [1K Decode]
RAS Sticky Error Handling [Clear Errors]
Allows you to select the method of handling the Sticky RAS errors.
Configuration options: [Clear Errors] [Leave Errors]
VGA 16-Bit Decode [Enabled]
Allows you to enable or disable the decoding of VGA for the devices behind
PXH. Configuration options: [Disabled] [Enabled]
ASUS DSEB-D16 Series
BIOS SETUP UTILITY
BIOS SETUP UTILITY
[Auto]
[4K Decode]
[Clear Errors]
[Enabled]
ESB2 Bus-M PCI-X Hub
configuration options.
This question will
allow to select the
maximum PCI bus speed
to be programmed.
Default will always
be set to AUTO where
bus speed will be
decided based on the
capabilities of the
device on that bus.
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
4-19