Table of Contents
Advertisement
Menu
Configure
Initialize
Objects
Rebuild
Check Consistency Allows you to check the data consistency of the logical drives of a
5.2.1
Creating a RAID 0 or RAID 1 set
The LSI Software RAID Configuration Utility allows you to create a RAID 0 or RAID
1 set using two types of configurations: Easy and New.
In Easy Configuration, the logical drive parameters are set automatically including
the size and stripe size (RAID 1 only).
In New Configuration, you manually set the logical drive parameters and assign
the set size and stripe size (RAID 1 only).
Using Easy Configuration
To create a RAID set using the Easy Configuration option:
From the utility main menu, highlight Configure, then press <Enter>.
1.
Use the arrow keys to select Easy Configuration, then press <Enter>.
2.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Defines Physical Arrays. An Array Will Automatically Become A VD
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
5-4
Description
Allows you to create RAID 0, RAID 1 or RAID 10 set using the Easy
Configuration or the New Configuration command. This menu also
allows you to view, add, or clear RAID configurations or select the
boot drive
Allows you to initialize the logical drives of a created RAID set
Allows you to initialize logical drives or change the logical drive
parameters
Allows you to rebuild failed drives
created RAID set
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Chapter 5: RAID configuration
Advertisement
Table of Contents
