Table of Contents
Advertisement
3.
The following screen appears. Select a channel and press <Enter> to enter
the setup.
LSI Logic Config Utility
Adapter List
Adapter
SAS1068
Esc = Exit Menu
Alt+N = Global Properties -/+ = Alter Boot Order
The numbers of the channel depend on the controller.
The Adapter Properties screen appears.
4.
Use the arrow keys to select RAID Properties, then press <Enter>.
LSI Logic Config Utility
Adapter Properties -- SAS1068
Esc = Exit Menu
Enter = Select Item -/+ = Change Item
The Select New Array Type screen apprears.
5.
Use the arrow keys to select Create IM Volume, then press <Enter>.
LSI Logic Config Utility
Select New Array Type -- SAS1068
Create IM Volume
Create IME Volume
Create IS Volume
Esc = Exit Menu
Enter = Choose array type to create
5-40
v6.16.00.00 (2007.05.07)
Global Properties
PCI
PCI
PCI
PCI
FW Revision
BUS
Dev
Fnc
Slot
05
03
00
00
1.15.00.00-IR
F1/Shift+1 = Help
v6.18.00.00 (2007.08.07)
Adapter
PCI Slot
PCI Address(Bus/Dev/Func)
MPT Firmware Revision
SAS Address
NVIDIA Version
Status
Boot Order
Boot Support
RAID Properties
SAS Topology
Advanced Adapter Properties
F1/Shift+1 = Help
v6.18.00.00 (2007.08.07)
Create Integrated Mirror Array of 2
disks plus an optional hot spare. Data
on the primary disk may be migrated.
Create Integrated Mirrored Enhanced
Array of 3 to 8 disks including an
optional hot spare.
ALL DATA on array disks will be DELETED!
Create Integrated Striping array of
2 to 8 disks.
ALL DATA on array disks will be DELETED!
F1/Shift+1 = Help
Status
Boot
Order
Disabled
0
Ins/Del = Alter Boot List
SAS1068
00
05.03.00
1.15.00.00.IR
500E0180:60831008
25.02
Disabled
0
(Enabled BIOS & OS)
Chapter 5: RAID configuration
Advertisement
Table of Contents
