Table of Contents
Advertisement
Press <F10> again, the logical drive information appears including a Logical
Drive menu that allows you to change the logical drive parameters.
Select RAID from the Logical Drive menu, then press <Enter>.
6.
Select RAID 10 from the menu, then press <Enter>.
7.
You need at least four identical hard disk drives when creating a RAID 10 set.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
Select DWC from the Logical Drive menu, then press <Enter>.
8.
Select On to enable the Disk Write Cache setting, then press <Enter>.
9.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
5-12
Logical Drive(s) Configured
LD
RAID
Size
Easy Configuration - ARRAY SELECTION MENU
0
0
308988MB
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
RAID = 0
Size = 308988MB
DWC = Off
RA
= On
Accept
SPAN = NO
Choose RAID Level For This VD
Logical Drive(s) Configured
LD
RAID
Size
Easy Configuration - ARRAY SELECTION MENU
0
10
308988MB
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
ONLIN A00-03
RAID = 1
Size = 154494MB
DWC = Off
RA
= On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
#Stripes
StripSz
4
64 KB
PORT #
RAID Level
RAID = 0
RAID 5
RAID 10
#Stripes
StripSz
4
64 KB
PORT #
Change DWC
Off
On
Status
ONLINE
Status
ONLINE
Chapter 5: RAID configuration
Advertisement
Table of Contents
