Table of Contents
Advertisement
Using New Configuration
When a RAID set is already existing, using the New Configuration command
erases the existing RAID configuration data. If you do not want to delete the
existing RAID set, use the View/Add Configuration command to view or create
another RAID configuration.
To create a RAID set using the New Configuration option:
From the utility main menu, highlight Configure, then press <Enter>.
1.
Use the arrow keys to select New Configuration, then press <Enter>.
2.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Clear Existing Configuration And Start A New Configuration
Use Cursor Keys to Navigate Between Items And Press Enter To Select An Option
3.
Follow steps 3 to 7 of the previous section.
Select Size from the Logical Drive menu, then press <Enter>.
4.
5.
Key-in the desired logical drive size, then press <Enter>.
LSI Logic Software RAID Configuration Utility Ver A.51 Aug 13, 2007
LD
0
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Enter VD Size (MB): 77247
Use Cursor Keys To Navigate Between Items And Press Enter To Select An Option
6.
Follow steps 8 to 13 of the previous section to create the RAID set.
ASUS DSEB-D16 Series
Configuration Menu
Easy Configuration
New Configuration
View/Add Configuration
Clear Configuration
Select Boot Drive
Logical Drive(s) Configured
RAID
Size
#Stripes
Easy Configuration - ARRAY SELECTION MENU
1
77247MB
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
Logical Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA
= On
Accept
SPAN = NO
Enter VD Size (MB):
StripSz
Status
2
64 KB
ONLINE
5-9
Advertisement
Table of Contents
