North Bridge Configuration; South Bridge Configuration - Asus P5KPL SE User Manual

North Bridge Configuration

North Bridge chipset Configuration
Memory Remap Feature
Configure DRAM Timing by SPD
Initiate Graphic Adapter
PEG Port Configuration
PEG Force x1
Memory Remap Feature [Disabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. We recommend that you set this item to Enabled when
you install 4GB memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Force x1.
Configuration options: [Enabled] [Disabled]

South Bridge Configuration

South Bridge chipset Configuration
Audio Controller
Front Panel Support Type
Audio Controller [Azalia]
Allows you to set the audio controller. Configuration options: [Azalia] [Disabled]
Front Panel Support Type [HD Audio]
Allows you to select the front panel support type. If High Definition Audio
Front Panel used, please set HD Audio mode. Configuration options: [AC97]
[HD Audio]
ASUS P5KPL SE
[Disabled]
[Enabled]
[PEG/PCI]
[Disabled]
[Azalia]
[HD Audio]
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
Options
Azalia
Disabled
2-25